Midwest | stripfarmer - 4/15/2024 07:23 No need to worry about different vacuum levels showing before the meters are loaded with seed. In other words, disregard what the gauge shows, then add seed and lower planter and drive forward, then once seeds are being metered, adjust each side of the planter until both are correct. At that point, if you still don’t have uniform vacuum, then look for leaks. Likely a hose is off somewhere if that’s the case. Good luck
You can just prime meters with it in the air. Usually 2-3 hits of the meter prime button will get a bit of seed to fall out of all units once full |