|
| Wilger low flow row monitor works fine. I’ve went starter and LFC/LFR formulations with Precision row flow or whatever it’s called.
You probably will want the lightest ball in the low flow set. Do not use the regular flow monitor. The low flow will move the ball up and down with the pump pulses. You have to sort of average it out to guess a rate based on experience. If the ball quits pulsing you have either run out or plugged something. Wilgers chart for flow is not accurate because the generic bifenture does not weigh the same as water.
Edit…
This was on a 36 row planter applying 5-6oz/acre @6.5 mph. It may not have worked as well with a smaller planter.
Edited by ncianotiller 3/28/2024 21:15
| |
|