AgTalk Home
AgTalk Home
Search Forums | Classifieds (162) | Skins | Language
You are logged in as a guest. ( logon | register )

37 pin John Deere harness to 16 pin Raven harness
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 3/27/2024 08:23 (#10682288 - in reply to #10682112)
Subject: RE: 37 pin John Deere harness to 16 pin Raven harness


Near Intersection of I-35 & I-90 Southern Mn.
Well yes and no. The 3 pin connector I am referring to is the 3 pin connector that Raven uses with their flow meter. My comments are correct for a Raven flow meter which could apply to others reading these posts.

I was not referring to the radar connector you have circled. I was referring to the flow meter connection shown in the lower right portion of your last drawing by the drawing of a Raven flow meter. It would still be a good idea to check for power there but do as you wish.

I'm curious as to why you are using a Magmeter considering that they are quite expensive.

Thanks for all your help. Good Bye.

Edited by tedbear 3/27/2024 08:30
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)