|
north central Ohio | We run 2” points on a landoll 2130 chisel plow putting ahydrous down with 2” points. Ever since going to 2” points anything I make to inject the vapor gets ripped off prematurely, gets wore off or leaks bad. Does anybody run something similar and found anything that works well? May have to put a couple wider points back on for the vapor if I don’t get any ideas here. Pictures is shank with just the liquid line. Thanks Greg
Edited by pigfarmer82 3/13/2024 06:57
 (IMG_5365 (full).jpeg)
 (IMG_5366 (full).jpeg)
Attachments
----------------
 IMG_5365 (full).jpeg (173KB - 48 downloads)
IMG_5366 (full).jpeg (150KB - 45 downloads)
| |
|
Anhydrous vapor line on chisel plow
