|
SC IA | Made this with the combine. 8010 with rotor turned up to about 1000 rpm and concave closed down tight. Turned fan down to about 5 or 600 and opened sieves. Pictures don’t show it very well but as far as cracking goes I’d say it’s a little better than half as good as a typical roller mill and cobs obviously didn’t get ground very well but calves still eat it
 (IMG_2536 (full).png)
 (IMG_2535 (full).png)
Attachments
----------------
 IMG_2536 (full).png (286KB - 343 downloads)
IMG_2535 (full).png (229KB - 370 downloads)
| |
|
Best way to grind corn.
