Posted 12/21/2023 18:07 (#10535231 - in reply to #10535119) Subject: RE: Converting an SAC 2030 feed wagon to 1000pto?
beanplanter - 12/21/2023 16:25
Feed wagon has a standard 540 sticking out of it. Driveline is a standard push button open back 540 female with a shear bolt then yokes and joint into what looks like a standard 21 spline shaft.
If I had to switch. tractors tomorrow I'd pull the pto shaft off a deer baler and get to making feed BUT you would have to be careful how many rpm you wind the tractor up to. It would be easy to overspeed the thing and burn up your gearbox on the mixer.
Converting an SAC 2030 feed wagon to 1000pto?
