|
Ks | I have a Envisio pro in a sprayer. I got a harness to use a star fire globe instead of the patch antenna. Had it working fine when using it a few months ago. I had it out the other day and put a John Deere globe on it and it could not detect gps source after trying for awhile and turning it on and off several times it finally connected.. tried it several times and it seems this is always the case. Turn it on and the receiver on… light on the 3000 receiver will go green but Envisio will continue to give no gps source detected.. eventually after turning on and off several times it will connect and be fine.. I have baud on both receiver and display on 38400. VTG, ZDA, and GGA on 10 hrtz on the receiver and tcm turned off because I’m using smarttrax. Any idea why it takes so long and finally randomly connects?
Edited by TTB86 12/10/2023 13:39
| |
|