|
Sanilac Co. Michigan | So, I have both of the above. When I got the controller, I used the magnetic speed sensor and the 250 for guidance. What I want to do is use this controller, now, to apply liquid fertilizer with my drill and not use the magnetic speed sensor and use the GPS speed off the 250. Is this possible and if so,, what do I need to do?
This was a controller on a sprayer set up I no longer use and figure this would be a good use for it. I'm looking at using a 4-4.5gpm electric pump to apply @10 gpa with a 15' drill/24 drill runs. Probably going to use the Surefire fertilizer tubes. Can anyone see a problem with that? Thanks. | |
|
Making EZGuide 250 work with a Micro Trak Spray Mate II auto rate controller
