AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Pull type seed spreader critique my plan
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
WildBuckwheat
Posted 11/4/2023 10:07 (#10468455 - in reply to #10468412)
Subject: RE: Pull type seed spreader critique my plan


Middlesex County, Ontario
The V belt reduction will work, just make sure that the flywheel side of the engine (pull start side) faces the implement, and that will get the direction correct. Like the first picture on that page I linked. A tractor PTO spins clockwise when you're standing behind the tractor, look at the pull start and you'll see which way the engine spins.

What I meant about the PTO is: setup the engine to drive a little splined PTO stub shaft and connect the spinner with a PTO shaft. Then you could swap out the spreader for a sprayer or a different implement. Makes the cart multi purpose.

Edited by WildBuckwheat 11/4/2023 10:08
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)