|
Northeast Indiana | I pull out of totes through the dura products direct injection system that pumps into the water line after the pump and inductor. It doesn't show it in the pictures, but a later plumbed up a 1 inch manifold off of the rinse system on my inductor. The 1" manifold is setup up with valves to be able to rinse out the line coming from the tote to the electric pump for that tote. When I want to switch chemicals I then just open the rinse line and run the electric pump to clean out that whole line. Before I got the direct injection system I ran totes through a 2" manifold system and had plumbed in a rinse line from the pressure side of the pump to the end of the manifold which allowed you to rinse out whichever tote line you wanted to switch over. | |
|
Spray tender trailer ideas
