|
| I did a major over haul on my 67 4020 ,All new but the rods and crank. got it back together ran it a little, and it sounds a little diferant that it did, so I checked the timming and if i set the fly wheel at TDC the inj. pump mark is about an eighth inch away from the marks linning up, or about 2 1/2 teeth before TDC ( retarderd I think) and I have turnned the pump as much as I can to try to get it right. Do I have the oil pump off one tooth? The tractor seems to run ok just don't think its 100% right and don't want to drop the pan and move the oil pump one tooth and find out thats not the trouble.
I wish I had some hard work for the old girl to see how much/less its got.This is my planting tractor and don't want it to quit ine the second day of planting. thanks Matt | |
|