Emporia, ks | I bought a Case 255 24HP compact tractor that had a loader on it. At some previous time, the operator must have slammed into something and bent the front frame that the front axle bolts to underneath and where it bolts to the side of the engine. It's bowed down about 1" from front to back. The hood and radiator is bolted to it too. The ID plate is attached to the right side frame rail. It's bent in the area I'm pointing too and you can see how much it's bowed by the rod I have in the second picture. Is anyone parting one of these out? I live by Emporia ks.
Edited by 57ringo 5/31/2023 15:18
(Resized_20230529_205200 (full).jpeg)
(Resized_20230529_203008 (full).jpeg)
(Resized_20230528_204049 (full).jpeg)
(255 frame (full).png)
Attachments ---------------- Resized_20230529_205200 (full).jpeg (102KB - 206 downloads) Resized_20230529_203008 (full).jpeg (107KB - 203 downloads) Resized_20230528_204049 (full).jpeg (99KB - 181 downloads) 255 frame (full).png (31KB - 285 downloads)
|