|
DE | been getting codes 200.18 and 190.16 which is moderately low injector rail pressure and fuel filter restriction. Put both new fuel filters on and then new electric fuel pump, same codes but ran ok, little short on power maybe but kept going trying to get wheat off. Now I'm getting 200. 1 which is severe low injector rail pressure and combine wont even run with nothing going through it. Took off rubber hose return line to fuel tank with engine off and key on, very small trickle. I was told by service guy who only works in the office that it should be a good flow. And I also pulled the suction lines out of fuel tank to check screen which was clean and blew air through the pick up and return to make sure it was clear. Any idea what is going on? | |
|
5088 combine how much fuel flow with engine off and key on
