|
| 2010 Magnum 335. Class 5 axle. Factory autosteer, Trimble external valve behind the cab. (LONG story there.)
We've owned it since since new and has always been set up for an FMX.
Usually I plop in an FMX, connect and it sees the autopilot and it's off to the races.
This year, I connected the FM, power everything the Autopilot starts, the Sonalert beeps, and the idiot light is a fast flash as usual. However, it will not connect to the FMX communication wise. Stays at 0% connecting to Autopilot.
I checked all fuses behind seat, all OK.
Key on, both running and not.
I swapped with a known working AP, it also starts, beeps, and also fast idiot light, but won't connect either.
Autosteer lockout switch IS in the correct position.
I took the monitor to another tractor and at first startup, it instantly sees the Autopilot of that tractor.
It WILL converge with the manual guidance plugin loaded.
Short of tearing panels apart looking for chewed wires (mouse damage 2 years ago but Autosteer was never affected) what am I missing??
| |
|
FMX not seeing Autopilot Magnum
