|
NC Iowa | i got the 054 cable to input speed and screen painting from the 440 to the criizer ll . i have it set correctly to input the gps speed signal from the cruizer to the 440. i can not get it to paint the boom sections on the cruizer. i have i cruizer set to hardware.
at the advise of joe at sprayer specialities in kansas, i did the following o the 440.
unplugged the serial connector, turned the data logger on, and set the trigger value to 1. then plugged the serial cable back in. i was hopeful but still dont get any acreen painting.
any additional information on this? i hope to spray soon and would really like this to work.
Edited by gene_champ 5/17/2022 19:43
 (20220516_181400 (full).jpg)
 (20220517_194253 (full).jpg)
Attachments
----------------
 20220516_181400 (full).jpg (233KB - 112 downloads)
20220517_194253 (full).jpg (78KB - 107 downloads)
| |
|
using a '054' cable from a 440 to a cruizer ll
