Viewing a forum - Precision Talk

Forums | Classifieds (26) | Skins | Language

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 1171 1172 1173 1174 1175 1176 ... 1177 1178 1179 1180 1181 1182 1183 ... > Forums List -> Precision Talk

JD 2600 display and a flexicoil seeder monitor - Skinhead : 5/19/2007 22:49
- RE: JD 2600 display and a flexicoil seeder monitor - IACSR : 5/22/2007 14:45
  - Re: JD 2600 display and a flexicoil seeder monitor - iowafarmhand : 6/1/2007 15:43

Recording with a GS2 - MidKSKSU : 5/19/2007 13:56
- Re: Recording with a GS2 - zoid : 5/19/2007 14:33
  - Re: Recording with a GS2 - IACSR : 5/19/2007 15:42
    - Re: Recording with a GS2 - Francis : 5/19/2007 16:31
      - Re: Recording with a GS2 - bigaljack : 5/21/2007 22:06
- RE: Recording with a GS2 - aje : 5/19/2007 15:50
- RE: Recording with a GS2 - limi : 5/19/2007 18:52
- Re: Recording with a GS2 - dutch : 5/20/2007 08:39
  - Re: iTC software - aje : 5/20/2007 16:51
    - Re: Recording with a GS2 - dutch : 5/20/2007 17:39
  - Re: Recording with a GS2 - Kamp : 5/20/2007 18:46
    - Re: Recording with a GS2 - dutch : 5/20/2007 23:18
      - Re: Recording with a GS2 - iowafarmhand : 6/1/2007 15:38
- RE: Recording with a GS2 - JohnBlue : 5/21/2007 00:12

Taking the plunge, would appreciate comments/suggestions - Chip : 5/19/2007 12:53
- RE: Taking the plunge, would appreciate comments/suggestions - houghta3 : 5/19/2007 19:19
  - Re: Taking the plunge, would appreciate comments/suggestions - farmdog : 5/20/2007 00:02
    - Re: Taking the plunge, would appreciate comments/suggestions - plowboy : 5/20/2007 04:35
      - Re: Taking the plunge, would appreciate comments/suggestions - farmdog : 5/20/2007 07:44
        
        Re: Taking the plunge, would appreciate comments/suggestions - Chip : 5/20/2007 15:51
    - Re: Taking the plunge, would appreciate comments/suggestions - Bruno Koop : 5/21/2007 03:24
      - Re: Taking the plunge, would appreciate comments/suggestions - farmdog : 5/22/2007 07:06
- Re: Taking the plunge, would appreciate comments/suggestions - willmarman : 5/20/2007 00:14
- Re: Taking the plunge, would appreciate comments/suggestions - alange : 5/20/2007 01:19
- RE: Taking the plunge, would appreciate comments/suggestions - Chad H : 5/20/2007 10:01
  - RE: Taking the plunge, would appreciate comments/suggestions - Bluffman : 5/20/2007 15:18
    - RE: Taking the plunge, would appreciate comments/suggestions - Chad H : 5/21/2007 00:20
      - Re: Taking the plunge, would appreciate comments/suggestions - alange : 5/21/2007 12:27
      - RE: Taking the plunge, would appreciate comments/suggestions - Bluffman : 5/21/2007 16:16
      - RE: Taking the plunge, would appreciate comments/suggestions - plowboy : 5/21/2007 19:51
        
        RE: Taking the plunge, would appreciate comments/suggestions - Chad H : 5/22/2007 08:56
        
        Surely you're mistaken . . . - Ed Boysun : 5/22/2007 10:22
        
        RE: Surely you're mistaken . . . - agboy : 5/22/2007 13:33
        
        Re: Taking the plunge, would appreciate comments/suggestions - Mbmaring : 5/23/2007 00:59
        
        Exactly. N/T. - Chad H : 5/23/2007 01:21
- Some followup question and comments - Chip : 5/20/2007 16:36
  - Re: Taking the plunge, would appreciate comments/suggestions - raider2b : 5/20/2007 18:45
  - Re: Taking the plunge, would appreciate comments/suggestions - Kamp : 5/20/2007 19:32
  - Re: Taking the plunge, would appreciate comments/suggestions - willmarman : 5/20/2007 19:49
    - Re: Taking the plunge, would appreciate comments/suggestions - dheitz : 5/21/2007 14:39
    - Re: Taking the plunge, would appreciate comments/suggestions - alange : 5/23/2007 10:36

Insight Direct Command module updates - Ron..NE ILL..10/48 : 5/17/2007 22:07
- RE: Insight Direct Command module updates - tedbear : 5/18/2007 08:35
  - RE: Insight Direct Command module updates - bleedred : 5/18/2007 17:19
    - RE: Insight Direct Command module updates - Ron..NE ILL..10/48 : 5/18/2007 20:43
      - RE: Insight Direct Command module updates - tedbear : 5/19/2007 07:54
        
        Re: Insight Direct Command module updates - jonnybegood : 5/19/2007 08:51
        
        Re: Insight Direct Command module updates - tedbear : 5/21/2007 08:39
        
        RE: Insight Direct Command module updates - Ron..NE ILL..10/48 : 5/19/2007 20:54

Precison Ag Research #'s - DMD : 5/17/2007 14:05
- Re: Precison Ag Research #'s - Bluffman : 5/19/2007 09:10

deere itec pro youtube video - gpsfarmboy : 5/17/2007 10:58

Magellan Single Freq RTK GPS unit - Applicator : 5/17/2007 10:20

Outback e-drive? - jakencks : 5/17/2007 09:48
- RE: Outback e-drive? - tybar : 5/19/2007 21:10

EZ-Guide 500, autopilot, sprayer when to engage - raider2b : 5/17/2007 08:07
- RE: EZ-Guide 500, autopilot, sprayer when to engage - bleedred : 5/18/2007 17:23
  - RE: EZ-Guide 500, autopilot, sprayer when to engage - bob freeze : 5/19/2007 13:28
    - RE: EZ-Guide 500, autopilot, sprayer when to engage - redrotor : 5/21/2007 23:54
      - Re: EZ-Guide 500, autopilot, sprayer when to engage - raider2b : 5/26/2007 08:12

EZ-Guide 500 Name Creation Utility & .Net Framework - AgMan : 5/16/2007 18:40
- RE: EZ-Guide 500 Name Creation Utility & .Net Framework - tedbear : 5/17/2007 10:03
  - .Net Framework 2.0 is not a part of XP SP2 - Macy : 5/17/2007 11:35
    - Re: EZ-Guide 500 Name Creation Utility & .Net Framework - AgMan : 5/17/2007 17:27
      - Re: EZ-Guide 500 Name Creation Utility & .Net Framework - Macy : 5/17/2007 20:57
  - Re: EZ-Guide 500 Name Creation Utility & .Net Framework - AgMan : 5/17/2007 17:29
    - Re: EZ-Guide 500 Name Creation Utility & .Net Framework - tedbear : 5/18/2007 08:29
      - Download it - Macy : 5/18/2007 09:02
        
        Re: EZ-Guide 500 Name Creation Utility & .Net Framework - BLACKSHEEP : 5/18/2007 11:42
        
        Re: EZ-Guide 500 Name Creation Utility & .Net Framework - JAR : 5/18/2007 12:44

Beeline Arrow systems? - Newguy : 5/16/2007 14:27
- RE: Beeline Arrow systems? - nuestfarms : 5/16/2007 14:40
  - RE: Beeline Arrow systems? - paconsult : 5/16/2007 22:23
    - Re: Beeline Arrow systems? - waterbottle : 5/17/2007 04:47
      - Re: Beeline Arrow systems? - paconsult : 5/17/2007 18:40
        
        Re: Beeline Arrow systems? - waterbottle : 5/18/2007 07:14
        Re: Beeline Arrow systems? - marli : 5/21/2007 00:04
- RE: Beeline Arrow systems? - houghta3 : 5/16/2007 22:51
- Re: Beeline Arrow systems? - Bluffman : 5/19/2007 09:13
  - Re: Beeline Arrow systems? - marli : 5/19/2007 22:37
- i have one in my cat 835b and use for strip-tilling - halfbaked : 5/19/2007 21:58

GS2 Feild Totals - RYAN Farms : 5/15/2007 19:57
- Re: GS2 Field Totals - dutch : 5/15/2007 22:39

guidance for planter or drill - bighert : 5/15/2007 16:42
- RE: guidance for planter or drill - RTKGuru : 5/16/2007 01:09
- RE: guidance for planter or drill - Ed Boysun : 5/16/2007 09:19
  - RE: guidance for planter or drill - Don Smith : 5/16/2007 15:46
  - RE: guidance for planter or drill - Case IH farmer : 5/17/2007 23:37
    - RE: guidance for planter or drill - Ed Boysun : 5/17/2007 23:58
      - Skip Pass balances implement load - alange : 5/18/2007 10:49
- RE: guidance for planter or drill - dheitz : 5/16/2007 20:48
  - Outback - Ed Boysun : 5/17/2007 10:10

EZ-Guide 500 Update - New Firmware - tedbear : 5/15/2007 10:20
- Re: EZ-Guide 500 Update - New Firmware - EC IA : 5/15/2007 11:23
- Re: EZ-Guide 500 Update - New Firmware - outlaw2u : 5/15/2007 13:40
  - Re: EZ-Guide 500 Update - New Firmware - marli : 5/15/2007 19:45
  - Re: EZ-Guide 500 Update - New Firmware - AgMan : 5/16/2007 21:37
    - Re: EZ-Guide 500 Update - New Firmware - AgMan : 5/16/2007 21:40
- RE: Net Framework error? - cbSCNE : 5/16/2007 08:06
  - Re: EZ-Guide 500 Update - New Firmware - bjkask : 5/16/2007 11:05
  - Re: EZ-Guide 500 Update - New Firmware - AgMan : 5/16/2007 18:36

afs calibration data 2388 - bigaljack : 5/14/2007 22:40
- Re: afs calibration data 2388 - torn : 5/15/2007 09:28

JD Office- Offsets - Chad H : 5/14/2007 22:06
- Re: JD Office- Offsets - murflow : 5/15/2007 05:41
  - Re: JD Office- Offsets - Chad H : 5/16/2007 00:38

Trimble and Flexi-Coil setup FODDs are available - Macy : 5/14/2007 20:51

Very strange Direct Command problems - bigfarmerdave : 5/14/2007 15:54
- RE: Very strange Direct Command problems - tedbear : 5/15/2007 08:32
- RE: Very strange Direct Command problems - PB from Oz : 5/15/2007 20:27
  - RE: Very strange Direct Command problems - DevinF : 5/15/2007 21:32
    - RE: Very strange Direct Command problems - BentikBoy : 5/16/2007 00:52
    - Re: Very strange Direct Command problems - bigfarmerdave : 5/16/2007 09:49
      - Re: Very strange Direct Command problems - DevinF : 5/16/2007 15:55
        
        Re: Very strange Direct Command problems - PB from Oz : 5/17/2007 00:05
- Re: Very strange Direct Command problems - ksfarmer : 5/17/2007 09:10

Autofarm to Insight with Direct Command - tedbear : 5/13/2007 06:57
- RE: Autofarm to Insight with Direct Command - DG N. AL : 5/13/2007 10:40
  - RE: Autofarm to Insight with Direct Command - marli : 5/13/2007 11:01
    - RE: Autofarm to Insight with Direct Command - tedbear : 5/13/2007 13:33
- RE: Autofarm to Insight with Direct Command - GTD : 5/13/2007 22:17
  - RE: Autofarm to Insight with Direct Command - tedbear : 5/14/2007 06:52
    - Re: Autofarm to Insight with Direct Command - waterbottle : 5/15/2007 07:59
    - RE: Autofarm to Insight with Direct Command - GTD : 5/15/2007 21:14
      - Re: Autofarm to Insight with Direct Command - waterbottle : 5/17/2007 06:54
        
        Re: Autofarm to Insight with Direct Command - tedbear : 5/17/2007 07:53
- Farminguy here - farminguy : 5/18/2007 00:00
  - RE: Farminguy here - FRMLPLR : 5/18/2007 13:13
    - RE: Farminguy here - GTD : 5/18/2007 18:15
      - Re: Autofarm to Insight with Direct Command - farminguy : 5/18/2007 23:09
        
        Re: Autofarm to Insight with Direct Command - GTD : 5/18/2007 23:58
- RE: Autofarm to Insight with Direct Command - johmur : 5/20/2007 19:34

GS2 and Exterior Boundaries - mrcinch : 5/13/2007 00:54
- RE: GS2 and Exterior Boundaries - gman : 5/13/2007 07:48
  - RE: GS2 and Exterior Boundaries - IACSR : 5/13/2007 08:53
    - Re: GS2 and Exterior Boundaries - dutch : 5/13/2007 09:08
- RE: GS2 and Exterior Boundaries - mij : 5/26/2007 12:34

GS2 and Acres - Bob Mc : 5/12/2007 23:23
- Re: GS2 and Acres - dutch : 5/13/2007 13:49
  - Re: GS2 and Acres - Bob Mc : 5/13/2007 14:28
    - Re: GS2 and Acres - dutch : 5/13/2007 15:36
- RE: GS2 and Acres - mij : 5/26/2007 12:45

E-Z Steer 500, 8500 Wilmar Calibration - northfarmer : 5/12/2007 23:12
- Re: E-Z Steer 500, 8500 Wilmar Calibration - alange : 5/12/2007 23:19
- RE: E-Z Steer 500, 8500 Wilmar Calibration - trdoo : 5/14/2007 09:08
  - Check the EZ-guide.com web site for new firmware - alange : 5/16/2007 17:33

2 Pass Headlands with Autopilot & FMD - bushed52 : 5/12/2007 22:33
- RE: 2 Pass Headlands with Autopilot & FMD - Arnie : 5/13/2007 23:15
  - RE: 2 Pass Headlands with Autopilot & FMD - bushed52 : 5/14/2007 22:16

ez-steer wheel ? - mlswaar : 5/12/2007 08:28
- RE: ez-steer wheel ? - houghta3 : 5/12/2007 11:26
  - Thanks , that was EZ NT - mlswaar : 5/12/2007 14:16

"realtime" remote tracking - chuckster : 5/12/2007 07:36

Ez guide 500 in a CIH9350 - CowsNPlows : 5/11/2007 23:16

trimble 132 htz changing - dmaxdiesel : 5/11/2007 20:35
- RE: trimble 132 htz changing - DG N. AL : 5/11/2007 21:36
- Re: trimble 132 htz changing - Applicator : 5/12/2007 10:24
  - Re: trimble 132 htz changing - dmaxdiesel : 5/12/2007 13:59
    - Re: trimble 132 htz changing - Applicator : 5/12/2007 17:43
      - Re: trimble 132 htz changing - mtbrights : 5/12/2007 22:46
        
        Re: trimble 132 htz changing - Applicator : 5/13/2007 09:31
        Re: trimble 132 htz changing - trapper219 : 5/14/2007 11:35

AgLeader Direct Command Issues on Deere Sprayer - icgreen : 5/11/2007 11:59
- RE: AgLeader Direct Command Issues on Deere Sprayer - link214 : 5/11/2007 23:03
  - RE: AgLeader Direct Command Issues on Deere Sprayer - tedbear : 5/12/2007 06:22

EZSteer & foot switch - farmdog : 5/11/2007 07:33
- Re: EZSteer & foot switch - Bruno Koop : 5/11/2007 08:42
- RE: EZSteer & foot switch - Mmaxed : 5/11/2007 11:00
  - Re: EZSteer & foot switch - alange : 5/11/2007 11:34
    - Re: EZSteer & foot switch - farmdog : 5/12/2007 22:22
      - Re: EZSteer & foot switch - alange : 5/12/2007 23:56
        
        Re: EZSteer & foot switch - farmdog : 5/13/2007 07:17
        
        final report - farmdog : 5/23/2007 22:14
- Re: EZSteer & foot switch - Roehm Farms : 5/11/2007 11:41
- Re: EZSteer & foot switch - nkdealer : 5/11/2007 22:30

EZ Guide antenna wire. - Downwardspiral : 5/11/2007 06:57
- Re: EZ Guide antenna wire. - alange : 5/11/2007 11:42

EZ guide plus hooked to Universal Moniter - NYplowboy : 5/10/2007 22:51
- Re: EZ guide plus hooked to Universal Moniter - Mbmaring : 5/10/2007 22:55
- RE: EZ guide plus hooked to Universal Moniter - marli : 5/11/2007 01:15
- Re: EZ guide plus hooked to Universal Moniter - torn : 5/11/2007 09:22
  - Re: EZ guide plus hooked to Universal Moniter - NYplowboy : 5/11/2007 12:03
    - Re: EZ guide plus hooked to Universal Moniter - torn : 5/11/2007 12:07
- Re: EZ guide plus hooked to Universal Moniter - alange : 5/11/2007 11:51

Ez-Guide 500 Omnistar (Purchase from CaseIH) - JAR : 5/10/2007 00:34
- RE: Ez-Guide 500 Omnistar (Purchase from CaseIH) - tedbear : 5/10/2007 07:15
  - RE: Ez-Guide 500 Omnistar (Purchase from CaseIH) - JAR : 5/10/2007 07:31
    - Re: Ez-Guide 500 Omnistar (Purchase from CaseIH) - Allis4ever : 5/10/2007 13:16
      - Re: Ez-Guide 500 Omnistar (Purchase from CaseIH) - JAR : 5/10/2007 16:38

750 heating up - Badger : 5/8/2007 23:50
- RE: 750 heating up - daveb : 5/14/2007 12:14

Lightbar in Rowgator - cbSCNE : 5/8/2007 13:47
- RE: Lightbar in Rowgator - IFS : 5/10/2007 10:51

Garmin GPS 18 5 Hz - Schorsch : 5/8/2007 05:06
- Re: Garmin GPS 18 5 Hz - aje : 5/8/2007 08:36
  - Re: Garmin GPS 18 5 Hz - raider2b : 5/8/2007 22:29

trimble 500 and challenger 55 - graingrower : 5/7/2007 23:53

Trimble parts - NYplowboy : 5/7/2007 21:30
- Re: Trimble parts - raider2b : 5/7/2007 21:39
  - Re: Trimble parts - alange : 5/8/2007 11:49

Greenstar to Raven 450 - ndarbuckle : 5/7/2007 16:54
- Re: Greenstar to Raven 450 - aje : 5/7/2007 17:49
- RE: Greenstar to Raven 450 - sugar : 5/7/2007 19:41
  - Re: Greenstar to Raven 450 - gone fishing : 5/7/2007 21:28
- RE: Greenstar to Raven 450 - ndarbuckle : 5/8/2007 09:27

Shift Track on WASS - tracman : 5/7/2007 14:41
- RE: Shift Track on WASS - LHaag : 5/7/2007 15:01
- Re: Shift Track on WASS - alange : 5/11/2007 11:56
  - Re: Shift Track on WASS - tracman : 5/11/2007 21:20
    - Re: Shift Track on WASS - alange : 5/12/2007 00:55

Looking For Older Autofarm Parts and Equipment - ckramos : 5/7/2007 12:03
- RE: Looking For Older Autofarm Parts and Equipment - FRMLPLR : 5/7/2007 13:22
  - RE: Looking For Older Autofarm Parts and Equipment - ckramos : 5/7/2007 14:10

EZ steer 500 - mtfarmbro : 5/6/2007 23:16
- RE: EZ steer 500 - Montana Gary : 5/7/2007 18:39
  - RE: EZ steer 500 - mtfarmbro : 5/7/2007 23:50
- RE: EZ steer 500 - agboy : 5/7/2007 22:15
- Re: EZ steer 500 - Roehm Farms : 5/10/2007 00:57

EZ-Steer 500 steering wheel diameter settings - Mbmaring : 5/6/2007 14:12
- RE: EZ-Steer 500 steering wheel diameter settings - mtfarmbro : 5/6/2007 23:13
  - Re: EZ-Steer 500 steering wheel diameter settings - Mbmaring : 5/7/2007 00:03
    - Re: EZ-Steer 500 steering wheel diameter settings - mtfarmbro : 5/7/2007 00:12
    - Re: EZ-Steer 500 steering wheel diameter settings - gvman : 5/4/2008 11:50
      - Re: EZ-Steer 500 steering wheel diameter settings - Mbmaring : 5/10/2008 13:32

Seed Command - scottag : 5/6/2007 13:22
- Re: Seed Command - Mbmaring : 5/6/2007 18:15
  - Re: Seed Command - scottag : 5/6/2007 19:10

Obsevation, perception and venting - raider2b : 5/6/2007 12:59
- RE: Obsevation, perception and venting - Arnie : 5/6/2007 23:52
- Re: Obsevation, perception and venting - Mbmaring : 5/7/2007 00:19

Field Manager Display and VRC control - DG N. AL : 5/6/2007 09:57
- RE: Field Manager Display and VRC control - Arnie : 5/6/2007 23:02
  - RE: Field Manager Display and VRC control - DG N. AL : 5/7/2007 07:57
  - Re: Field Manager Display and VRC control - cnhdave : 5/8/2007 11:24
    - Re: Field Manager Display and VRC control - DG N. AL : 5/8/2007 19:41
      - Re: Field Manager Display and VRC control - Tom N : 5/8/2007 23:52

EZ-Guide 500 update WAAS to Omnistar XP? - JohnRider : 5/6/2007 05:10
- RE: EZ-Guide 500 update WAAS to Omnistar XP? - Ironwood : 5/6/2007 08:08
- Re: EZ-Guide 500 update WAAS to Omnistar XP? - torn : 5/6/2007 21:31
  - Re: EZ-Guide 500 update WAAS to Omnistar XP? - tedbear : 5/7/2007 07:11
    - Re: EZ-Guide 500 update WAAS to Omnistar XP? Capture time? - Ron..NE ILL..10/48 : 5/10/2007 06:44
      - Re: EZ-Guide 500 update WAAS to Omnistar XP? - Applicator : 5/12/2007 18:01
      - Re: EZ-Guide 500 update WAAS to Omnistar XP? Capture time? - randyf : 5/12/2007 21:42
- RE: EZ-Guide 500 update WAAS to Omnistar XP? - trdoo : 5/7/2007 09:56

Anybody sell(or tips) bolt on TrimbleGPS braket for Deere 4x50/4x55/4X60 on front part-top of cab - outlaw2u : 5/5/2007 21:11
- Factory cab bolts - Kamp : 5/5/2007 22:07
- RE: Anybody sell(or tips) bolt on TrimbleGPS braket for Deere 4x50/4x55/4X60 on front part-top of ca - Don Smith : 5/5/2007 22:29
  - RE: Anybody sell(or tips) bolt on TrimbleGPS braket for Deere 4x50/4x55/4X60 on front part-top of ca - dirtpan : 5/5/2007 23:58
- RE: Anybody sell(or tips) bolt on TrimbleGPS braket for Deere 4x50/4x55/4X60 on front part-top of ca - Don Smith : 5/6/2007 09:14
  - Re: Anybody sell(or tips) bolt on TrimbleGPS braket for Deere 4x50/4x55/4X60 on front part-top of ca - HT67 : 5/6/2007 15:20
    - Re: Anybody sell(or tips) bolt on TrimbleGPS braket for Deere 4x50/4x55/4X60 on front part-top of ca - Don Smith : 5/6/2007 16:27
      - Re: Anybody sell(or tips) bolt on TrimbleGPS braket for Deere 4x50/4x55/4X60 on front part-top of ca - HT67 : 5/6/2007 22:38

Rightrac up and running- User comments only - johmur : 5/5/2007 19:46
- Re: Rightrac up and running- User comments only - willmarman : 5/6/2007 02:12
  - Re: Rightrac up and running- User comments only - johmur : 5/6/2007 10:59
    - Shapefile comments - Macy : 5/6/2007 19:00
- RE: Rightrac up and running- User comments only - johmur : 5/11/2007 23:37

GS2 Yield Mapping Question - bviator : 5/5/2007 18:23
- Re: GS2 Yield Mapping Question - iowafarmhand : 6/1/2007 16:00

AFS/Vista - CowsNPlows : 5/5/2007 18:21
- Re: AFS/Vista - torn : 5/5/2007 22:21

Jump to page: < 1171 1172 1173 1174 1175 1176 ... 1177 1178 1179 1180 1181 1182 1183 ... > Forums List -> Precision Talk
(Search this forum)

(Delete cookies)