Viewing a forum - Precision Talk

Forums | Classifieds (42) | Skins | Language

You are logged in as a guest. ( logon | register )

Precision Talk
		Message format

Jump to page: < 1 2 3 4 5 6 7 8 9 10 11 12 ... > Forums List -> Precision Talk

Greenstar rate controller with 4640 monitor - kgbarnett22 : 6/11/2024 15:16
- RE: Greenstar rate controller with 4640 monitor - TeamBrendan : 6/11/2024 16:38
  - RE: Greenstar rate controller with 4640 monitor - kgbarnett22 : 6/11/2024 18:38
    - RE: Greenstar rate controller with 4640 monitor - SJ72 : 6/11/2024 20:55

How to get serial gps data out of JD SF7000 and 4600 - Undercovers : 6/11/2024 14:41
- RE: How to get serial gps data out of JD SF7000 and 4600 - aberlefam : 6/12/2024 12:32

John deere GEN4 4600 distance meter? - dougmhb : 6/11/2024 12:09
- RE: John deere GEN4 4600 distance meter? - KevinSeidl : 6/11/2024 15:26
  - RE: John deere GEN4 4600 distance meter? - dougmhb : 6/11/2024 23:03
    - RE: John deere GEN4 4600 distance meter? - KevinSeidl : 6/12/2024 07:25
      - RE: John deere GEN4 4600 distance meter? - dougmhb : 6/12/2024 09:55
        
        RE: John deere GEN4 4600 distance meter? - KevinSeidl : 6/13/2024 07:05

InCommand 1200 and hydraulic planter drive settings? - Kelly : 6/11/2024 08:05
- RE: InCommand 1200 and hydraulic planter drive settings? - sunman : 6/11/2024 08:53
- RE: InCommand 1200 and hydraulic planter drive settings? - AVP_Matt : 6/11/2024 08:55
- Thanks for the help - Kelly : 6/12/2024 07:19

APMD Will Not Lock on The line..... - Dirtfarmer1000 : 6/10/2024 23:25
- RE: APMD Will Not Lock on The line..... - co2shaun : 6/12/2024 13:32
  - RE: APMD Will Not Lock on The line..... - Dirtfarmer1000 : 6/12/2024 16:12
- RE: APMD Will Not Lock on The line..... - Trimbleguy : 6/14/2024 00:07

Trimble 372 392 - Marcomf6270 : 6/10/2024 13:41
- RE: Trimble 372 392 - mx270a : 6/10/2024 14:58
  - RE: Trimble 372 392 - Marcomf6270 : 6/10/2024 15:34
- RE: Trimble 372 392 - 1666guy : 6/10/2024 15:07

Resistor value in Agleader harness 201-0492-02 - Pat H : 6/10/2024 09:34
- RE: Resistor value in Agleader harness 201-0492-02 - Jason_WI : 6/10/2024 17:06
- RE: Resistor value in Agleader harness 201-0492-02 - WildBuckwheat : 6/10/2024 17:38
  - RE: Ag leader says it's a 4.7 ohm resistor - Pat H : 6/10/2024 18:17
    - RE: Ag leader says it's a 4.7 ohm resistor - nathan10 : 6/10/2024 20:03

Raven Flow Meter - wjk : 6/10/2024 07:22
- RE: Raven Flow Meter - Amc4life : 6/10/2024 10:06
- RE: Raven Flow Meter - wjk : 6/10/2024 11:01
- RE: Raven Flow Meter - JD630 : 6/10/2024 22:00

Monitoring downforce on ag leader - Hoosierheartland : 6/9/2024 20:07
- RE: Monitoring downforce on ag leader - 4WD : 6/9/2024 21:00
  - RE: Monitoring downforce on ag leader - tedbear : 6/10/2024 06:15
- RE: Monitoring downforce on ag leader - BroadviewAg : 6/12/2024 14:44

ag leader where to start - [email protected] : 6/9/2024 13:24
- RE: ag leader where to start - chazawalla : 6/9/2024 13:50
- RE: ag leader where to start - farmerbroun : 6/9/2024 20:28
- RE: ag leader where to start - 4WD : 6/9/2024 21:24
- RE: ag leader where to start - 1156versatile : 6/19/2024 06:50
  - RE: ag leader where to start - chazawalla : 6/20/2024 11:44

Why is Guidance Off? - wolves1 : 6/9/2024 10:33
- RE: Why is Guidance Off? - GusFarms : 6/9/2024 12:20
- RE: Why is Guidance Off? - cyclones30 : 6/17/2024 08:47

Help?!! - hltpfeeders : 6/9/2024 10:20
- RE: Help?!! - gpsdude : 6/9/2024 14:40
- RE: Help?!! - GcDm2010 : 6/9/2024 15:55

Green star rate controller on r4038 sprayer - 728805 : 6/9/2024 10:00

Raven 440 communicating with AgLeader InCommand 800 - B58 Hustler : 6/9/2024 09:59
- RE: Raven 440 communicating with AgLeader InCommand 800 - tedbear : 6/9/2024 12:38
  - RE: Raven 440 communicating with AgLeader InCommand 800 - B58 Hustler : 6/9/2024 17:23

smart connector questions,,, - Jim1_ks : 6/9/2024 08:43
- RE: smart connector questions,,, - AVP_Matt : 6/9/2024 23:21
  - RE: smart connector questions,,, - Jim1_ks : 6/10/2024 06:48
    - RE: smart connector questions,,, - AVP_Matt : 6/10/2024 07:52
      - RE: smart connector questions,,, - Jim1_ks : 6/11/2024 06:53

Challenger 655D/Massey 86xx Trimble navII issue - Iowa4thgen : 6/8/2024 11:33
- RE: Challenger 655D/Massey 86xx Trimble navII issue - otteb : 6/8/2024 11:46
- RE: Challenger 655D/Massey 86xx Trimble navII issue - Fingers77 : 6/8/2024 12:11
- RE: Challenger 655D/Massey 86xx Trimble navII issue - Massey1155 : 6/9/2024 07:10
  - RE: Challenger 655D/Massey 86xx Trimble navII issue - c_mayer : 6/10/2024 08:06

Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - golfnut : 6/7/2024 15:24
- RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - neo_ag : 6/7/2024 18:23
- RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - caseihfarmer : 6/8/2024 12:26
  - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - golfnut : 6/8/2024 13:00
    - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - caseihfarmer : 6/9/2024 22:35
      - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - neo_ag : 6/10/2024 04:35
    - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - Phainein7 : 6/9/2024 22:48
    - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - Phainein7 : 6/10/2024 08:26
    - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - AVP_Matt : 6/11/2024 09:06
      - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - Phainein7 : 6/11/2024 12:00
    - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - nnielsen : 6/16/2024 04:28
- RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - golfnut : 6/25/2024 17:29
- RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - golfnut : 6/25/2024 17:33
  - RE: Trimble TMX 2050, Implement Steering and Serial NTRIP Corrections - Phainein7 : 6/26/2024 11:41

255 error code on steering calibtation - farmerwalt : 6/7/2024 11:38
- RE: 255 error code on steering calibtation - c_mayer : 6/7/2024 14:13
  - RE: 255 error code on steering calibtation - farmerwalt : 6/7/2024 18:43
    - RE: 255 error code on steering calibtation - c_mayer : 6/8/2024 07:11
      - RE: 255 error code on steering calibtation - farmerwalt : 6/10/2024 07:52
        
        RE: 255 error code on steering calibtation - c_mayer : 6/10/2024 08:04
        
        RE: 255 error code on steering calibtation - farmerwalt : 6/10/2024 18:42
        
        RE: 255 error code on steering calibtation - c_mayer : 6/11/2024 07:20
        
        RE: 255 error code on steering calibtation - farmerwalt : 6/11/2024 08:32
- RE: 255 error code on steering calibtation - 1666guy : 6/7/2024 16:28
  - RE: 255 error code on steering calibtation - c_mayer : 6/7/2024 16:47
  - SORRY - farmerwalt : 6/7/2024 18:33

Variety Locator?? - KevinM : 6/7/2024 09:49
- RE: Variety Locator?? - collegeboy : 6/7/2024 20:08
  - RE: Variety Locator?? - KevinM : 6/11/2024 17:50
    - RE: Variety Locator?? - cyclones30 : 6/17/2024 09:31

Ag Leader Sure Force upgrade and getting my scale to work - DeereCIHandKinze : 6/6/2024 14:16
- RE: Ag Leader Sure Force upgrade and getting my scale to work - kgbarnett22 : 6/8/2024 10:59
- RE: Ag Leader Sure Force upgrade and getting my scale to work - caseihfarmer : 6/8/2024 12:38
- RE: Ag Leader Sure Force upgrade and getting my scale to work - BLTFARMS : 6/10/2024 06:49
- RE: Ag Leader Sure Force upgrade and getting my scale to work - BLTFARMS : 6/10/2024 06:49
- RE: Ag Leader Sure Force upgrade and getting my scale to work - ncalvin0 : 6/11/2024 12:18

sf3 replacement for rtk - SPOLJC : 6/6/2024 13:56
- RE: sf3 replacement for rtk - cyclones30 : 6/6/2024 15:05
  - RE: sf3 replacement for rtk - SPOLJC : 6/7/2024 00:36
    - RE: sf3 replacement for rtk - kgbarnett22 : 6/8/2024 11:03
      - RE: sf3 replacement for rtk - SPOLJC : 6/9/2024 02:55

JD 6000 and 2600 display start up issues - YoungOne : 6/6/2024 13:44
- RE: JD 6000 and 2600 display start up issues - cyclones30 : 6/6/2024 15:08

Gaps in Planting Data Maps - robbertsfarms : 6/6/2024 07:19
- RE: Gaps in Planting Data Maps - cyclones30 : 6/6/2024 09:28
- RE: Gaps in Planting Data Maps - GeoPardAg : 6/6/2024 16:03

Greenstar rate controller mapping delay - 3500ctd : 6/6/2024 01:29
- RE: Greenstar rate controller mapping delay - cyclones30 : 6/6/2024 09:29
  - RE: Greenstar rate controller mapping delay - 3500ctd : 6/6/2024 10:47
  - RE: Greenstar rate controller mapping delay - kgbarnett22 : 6/13/2024 03:51
- RE: Greenstar rate controller mapping delay - 4wdaaron : 6/6/2024 21:37

Gen3 20/20 Multiple rates / Population across planter CNH - magnumman : 6/5/2024 21:23
- RE: Gen3 20/20 Multiple rates / Population across planter CNH - Elmbar : 6/6/2024 04:52
  - RE: Gen3 20/20 Multiple rates / Population across planter CNH - magnumman : 6/6/2024 16:06
    - RE: Gen3 20/20 Multiple rates / Population across planter CNH - Elmbar : 6/6/2024 17:25
      - RE: Gen3 20/20 Multiple rates / Population across planter CNH - AVP_Matt : 6/7/2024 07:08

Raven viper pro - ebernuts : 6/5/2024 18:39
- RE: Raven viper pro - Breeggy : 6/5/2024 19:59
- RE: Raven viper pro - DawsonFarms : 6/5/2024 20:18
- RE: Raven viper pro - JD630 : 6/5/2024 21:58
- RE: Raven viper pro - kevinmc : 6/5/2024 23:03
- RE: Raven viper pro - BigMyke : 6/6/2024 05:18

Satellite issues? - hinfarm : 6/5/2024 18:25
- RE: Satellite issues? - ncook : 6/6/2024 14:41
  - RE: Satellite issues? - hinfarm : 6/6/2024 17:41
    - RE: Satellite issues? - cyclones30 : 6/6/2024 19:56
      - RE: Satellite issues? - hinfarm : 6/6/2024 21:14

Exporting Individual Guidance Lines - Ops Center to 2630 - FarmWeather : 6/5/2024 16:01
- RE: Exporting Individual Guidance Lines - Ops Center to 2630 - mit9750 : 6/5/2024 16:47
  - RE: Exporting Individual Guidance Lines - Ops Center to 2630 - FarmWeather : 6/5/2024 18:12
    - RE: Exporting Individual Guidance Lines - Ops Center to 2630 - mit9750 : 6/6/2024 08:05
  - RE: Exporting Individual Guidance Lines - Ops Center to 2630 - Gramps18 : 6/7/2024 06:30
    - RE: Exporting Individual Guidance Lines - Ops Center to 2630 - mit9750 : 6/8/2024 03:12

Autotrac Passive Implement guidance - chartmant8 : 6/4/2024 22:59
- RE: Autotrac Passive Implement guidance - cyclones30 : 6/5/2024 08:41
  - RE: Autotrac Passive Implement guidance - jermrief : 6/5/2024 15:02
- RE: Autotrac Passive Implement guidance - jah98 : 6/9/2024 21:04

Advice for a custom control/switch panel for a sprayer - aNullValue : 6/4/2024 22:01
- RE: Advice for a custom control/switch panel for a sprayer - WestMIguy : 6/5/2024 05:15
- RE: Advice for a custom control/switch panel for a sprayer - tedbear : 6/5/2024 08:26
- RE: Advice for a custom control/switch panel for a sprayer - Herbie56 : 6/5/2024 20:12

Admins: Please ban the following profile... - greenuser : 6/4/2024 18:35
- Done - mx270a : 6/4/2024 20:27

Hitch position sensor - littlefarmer1987 : 6/4/2024 16:32

bad agleader high current power cable? How to diagnose? - pfortfarm : 6/4/2024 14:56
- RE: bad agleader high current power cable? How to diagnose? - ShopTeacher : 6/4/2024 18:19
- RE: bad agleader high current power cable? How to diagnose? - Mooshine : 6/4/2024 20:38
- RE: bad agleader high current power cable? How to diagnose? - tedbear : 6/5/2024 08:58
  - RE: bad agleader high current power cable? How to diagnose? - pfortfarm : 6/6/2024 22:33

Raven 450 controller mapping with JD 4640 - JHSMN : 6/4/2024 07:47
- RE: Raven 450 controller mapping with JD 4640 - PLO NW MN : 6/4/2024 13:46
  - RE: Raven 450 controller mapping with JD 4640 - JHSMN : 6/4/2024 14:17
    - RE: Raven 450 controller mapping with JD 4640 - PLO NW MN : 6/4/2024 15:25
- RE: Raven 450 controller mapping with JD 4640 - bmatteson : 6/4/2024 16:40
  - RE: Raven 450 controller mapping with JD 4640 - JHSMN : 6/5/2024 17:35
  - RE: Raven 450 controller mapping with JD 4640 - JHSMN : 6/5/2024 19:34
    - RE: Raven 450 controller mapping with JD 4640 - PLO NW MN : 6/5/2024 20:13
      - RE: Raven 450 controller mapping with JD 4640 - bmatteson : 6/6/2024 07:10
      - RE: Raven 450 controller mapping with JD 4640 - JHSMN : 6/6/2024 15:06
    - RE: Raven 450 controller mapping with JD 4640 - bmatteson : 6/5/2024 22:17
      - RE: Raven 450 controller mapping with JD 4640 - bmatteson : 6/5/2024 22:28
- RE: Raven 450 controller mapping with JD 4640 - deere 4455 : 6/6/2024 05:25
  - RE: Raven 450 controller mapping with JD 4640 - tedbear : 6/6/2024 05:37
    - RE: Raven 450 controller mapping with JD 4640 - Uncle Cracker : 6/6/2024 09:12
    - RE: Raven 450 controller mapping with JD 4640 - JHSMN : 6/6/2024 15:11
      - RE: Raven 450 controller mapping with JD 4640 - PLO NW MN : 6/6/2024 15:24
    - RE: Raven 450 controller mapping with JD 4640 - JHSMN : 6/6/2024 15:12
      - A little more - tedbear : 6/7/2024 06:20
      - RE: Raven 450 controller mapping with JD 4640 - NHpuller : 6/10/2024 05:09
        
        RE: Raven 450 controller mapping with JD 4640 - re44 : 6/10/2024 18:27
- RE: Raven 450 controller mapping with JD 4640 - JHSMN : 7/15/2024 16:13

Agleader AgFiniti help needed - RF5 : 6/4/2024 00:08
- RE: Agleader AgFiniti help needed - countryraised : 6/4/2024 06:18
  - RE: Agleader AgFiniti help needed - RF5 : 6/4/2024 06:22
    - RE: Agleader AgFiniti help needed - AVP_Matt : 6/4/2024 08:04
  - RE: Agleader AgFiniti help needed - tedbear : 6/4/2024 08:17
- RE: Agleader AgFiniti help needed - caseihfarmer : 6/4/2024 07:00
- RE: Agleader AgFiniti help needed - ecil89 : 6/4/2024 12:03
- RE: Agleader AgFiniti help needed - aNullValue : 6/4/2024 16:16
  - RE: Agleader AgFiniti help needed - tedbear : 6/5/2024 09:59
- RE: Agleader AgFiniti help needed - superfarmer : 6/15/2024 07:11
  - RE: Agleader AgFiniti help needed - Stman10 : 6/17/2024 22:02

White 5100 and STMM - MF3680 : 6/3/2024 18:14
- RE: White 5100 and STMM - neo_ag : 6/3/2024 19:23
  - RE: White 5100 and STMM - MF3680 : 6/3/2024 22:16
  - RE: White 5100 and STMM - caseihfarmer : 6/3/2024 22:17
    - RE: White 5100 and STMM - MF3680 : 6/3/2024 22:31
      - RE: White 5100 and STMM - tedbear : 6/4/2024 08:40
        
        RE: White 5100 and STMM - MF3680 : 6/5/2024 14:42
        
        RE: White 5100 and STMM - 1666guy : 6/5/2024 18:06
        
        RE: White 5100 and STMM - tedbear : 6/5/2024 19:33
        
        RE: White 5100 and STMM - MF3680 : 6/7/2024 04:42
- RE: White 5100 and STMM - sunman : 6/7/2024 14:55
  - RE: White 5100 and STMM - tedbear : 6/8/2024 07:27

Trimble TMX 2050 field finder on FMX format - BLS : 6/3/2024 17:48
- RE: Trimble TMX 2050 field finder on FMX format - nnielsen : 6/16/2024 04:36

Homburg SmartSteer - golfnut : 6/3/2024 15:13
- RE: Homburg SmartSteer - Hiline : 6/3/2024 21:59
  - RE: Homburg SmartSteer - WPFarm : 6/18/2024 06:41

Topcon x25 - Dholman : 6/3/2024 14:24
- RE: Topcon x25 - c_mayer : 6/3/2024 16:51
  - RE: Topcon x25 - Dholman : 6/3/2024 21:21
    - RE: Topcon x25 - c_mayer : 6/4/2024 07:32
- RE: Topcon x25 - JAnderson : 6/3/2024 23:13
  - RE: Topcon x25 - Dholman : 6/4/2024 07:19
    - RE: Topcon x25 - JAnderson : 6/4/2024 07:57
      - RE: Topcon x25 - Dholman : 6/4/2024 08:07
        
        RE: Topcon x25 - JAnderson : 6/4/2024 09:31
        
        RE: Topcon x25 - Dholman : 6/4/2024 10:50
        
        RE: Topcon x25 - JAnderson : 6/4/2024 11:07
  - RE: Topcon x25 - 1666guy : 6/4/2024 12:55

Can you install a Autotrac 300 controller on a John Deere 4000 series tractor - vicscomp : 6/3/2024 11:59

How close can I mount 2 globes? - arem : 6/3/2024 11:32
- RE: How close can I mount 2 globes? - tedbear : 6/3/2024 11:36
  - RE: How close can I mount 2 globes? - arem : 6/3/2024 11:56
    - RE: How close can I mount 2 globes? - ljadx160 : 6/3/2024 12:35
    - RE: How close can I mount 2 globes? - 1666guy : 6/3/2024 12:39
    - RE: How close can I mount 2 globes? - 4WD : 6/3/2024 14:20
      - RE: How close can I mount 2 globes? - tedbear : 6/4/2024 09:10
        
        RE: How close can I mount 2 globes? - mohr-power : 6/13/2024 22:29
- RE: How close can I mount 2 globes? - ncook : 6/3/2024 13:19
- RE: How close can I mount 2 globes? - GcDm2010 : 6/3/2024 19:30

WAAS GEO-6 (PRN133) Outage - OBKGCC : 6/3/2024 08:05
- RE: WAAS GEO-6 (PRN133) Outage - Redtech : 6/16/2024 14:10
  - RE: WAAS GEO-6 (PRN133) Outage - OBKGCC : 6/17/2024 08:00

X-Fill - steve c-il : 6/2/2024 23:34
- RE: X-Fill - Joe@RFDG : 6/3/2024 05:50
- RE: X-Fill Solved ! - steve c-il : 6/3/2024 10:46

Ez guide 250 no guidance - lawfarms : 6/2/2024 17:57
- RE: Ez guide 250 no guidance - 1666guy : 6/2/2024 18:37
  - RE: Ez guide 250 no guidance - lawfarms : 6/2/2024 21:14
    - RE: Ez guide 250 no guidance - 1666guy : 6/2/2024 21:47
      - RE: Ez guide 250 no guidance - lawfarms : 6/3/2024 06:20
      - RE: Ez guide 250 no guidance - lawfarms : 6/3/2024 10:00

Pull type sprayer with GreenStar rate controller questions - kgbarnett22 : 6/2/2024 09:17
- RE: Pull type sprayer with GreenStar rate controller questions - cyclones30 : 6/2/2024 09:23
  - RE: Pull type sprayer with GreenStar rate controller questions - kgbarnett22 : 6/2/2024 10:02
- RE: Pull type sprayer with GreenStar rate controller questions - SJ72 : 6/2/2024 16:01
  - RE: Pull type sprayer with GreenStar rate controller questions - ILSODGRWR : 6/3/2024 05:45

Mosaic X5 base, mosaic x5 rover and intellislope - Undercovers : 6/1/2024 21:51
- RE: Mosaic X5 base, mosaic x5 rover and intellislope - mx270a : 6/2/2024 09:13
  - RE: Mosaic X5 base, mosaic x5 rover and intellislope - Undercovers : 6/3/2024 06:26

ATU 300 not working - High Acres : 6/1/2024 21:06
- RE: ATU 300 not working - godfather55v : 6/1/2024 21:54
  - RE: ATU 300 not working - High Acres : 6/1/2024 22:10
    - RE: ATU 300 not working - GusFarms : 6/1/2024 23:01
- RE: ATU 300 not working - hoofer : 6/2/2024 07:53
  - RE: ATU 300 not working - High Acres : 6/2/2024 14:50
    - RE: ATU 300 not working - Glenn in Ontario : 6/8/2024 08:03

Case 372/pro 600 heading constantly spinning. FIXED. - LazyJDairy : 6/1/2024 18:33

Steer Command Z2 installation gone very wrong. - mtbrights : 6/1/2024 13:25
- RE: Steer Command Z2 installation gone very wrong. - mkurkowski : 6/1/2024 23:04
- RE: Steer Command Z2 installation gone very wrong. - RowCrop : 6/1/2024 23:33
- RE: Steer Command Z2 installation gone very wrong. - tedbear : 6/2/2024 08:06
  - RE: Steer Command Z2 installation gone very wrong. - mtbrights : 6/3/2024 08:01
    - RE: Steer Command Z2 installation gone very wrong. - tedbear : 6/3/2024 08:16
- RE: Steer Command Z2 installation gone very wrong. - sunman : 6/3/2024 08:30
- RE: Steer Command Z2 installation gone very wrong. - mtbrights : 6/9/2024 22:32

Export Applied Data with time Stamp Ag Leader SMS - beerseller : 6/1/2024 12:25
- RE: Export Applied Data with time Stamp Ag Leader SMS - cyclones30 : 6/2/2024 09:55
  - RE: Export Applied Data with time Stamp Ag Leader SMS - beerseller : 6/3/2024 15:15

Jump to page: < 1 2 3 4 5 6 7 8 9 10 11 12 ... > Forums List -> Precision Talk
(Search this forum)

(Delete cookies)