Viewing a forum - Machinery Talk

Forums | Classifieds (89) | Skins | Language

You are logged in as a guest. ( logon | register )

Machinery Talk
		Message format

Jump to page: < 9125 9126 9127 9128 9129 9130 ... 9131 9132 9133 9134 9135 9136 9137 ... > Forums List -> Machinery Talk

JD 331 disk Good or Bad? - KSUWILDCAT : 8/6/2009 11:23
- Re: JD 331 disk Good or Bad? - candyo1955 : 8/6/2009 14:02
  - Re: JD 331 disk Good or Bad? - Buster 50 : 8/6/2009 19:04
- Re: JD 331 disk Good or Bad? - plowboy : 8/6/2009 21:17
  - Re: JD 331 disk Good or Bad? - candyo1955 : 8/7/2009 06:23
    - Re: JD 331 disk Good or Bad? - plowboy : 8/7/2009 12:53

Hyd Auger Drive. - StanSW.Mo : 8/6/2009 10:30
- Re: Hyd Auger Drive. - jmr : 8/6/2009 11:42
- RE: Hyd Auger Drive. - Mike SE IL : 8/6/2009 14:41
  - RE: Hyd Auger Drive. - dave morgan : 8/6/2009 16:30
    - RE: Hyd Auger Drive. - Mike SE IL : 8/7/2009 02:11
- Re: Hyd Auger Drive. - JonND : 8/6/2009 15:39
- Flow control? - Tim Cooke : 8/6/2009 16:40
  - RE: Flow control? - 4430deere : 8/6/2009 17:24
  - RE: Flow control? - dave morgan : 8/6/2009 17:24
    - 1/2 inch hoses and a few restrictions............. - Tim Cooke : 8/6/2009 17:35
- Fine the way it is - Bobby Greif : 8/6/2009 18:06
- Re: Hyd Auger Drive. - JRthefarmer : 8/6/2009 20:19
- Re: Hyd Auger Drive. - kggonzo : 8/6/2009 20:40
  - Re: Hyd Auger Drive. - cbiers : 8/6/2009 21:24
- RE: Hyd Auger Drive. - collegeboy : 8/6/2009 21:35
- Re: Hyd Auger Drive. - McCartman : 8/6/2009 22:10

1980 Ford LN 7000 - meyer1026 : 8/6/2009 09:48
- Re: 1980 Ford LN 7000 - paul2sd : 8/6/2009 12:27
- RE: 1980 Ford LN 7000 - JohnW : 8/7/2009 01:47

To chip or not to chip 99 ford 7.3 diesel - Pat H : 8/6/2009 09:10
- Re: To chip or not to chip 99 ford 7.3 diesel - Hamstn : 8/6/2009 09:28
  - Re: To chip or not to chip 99 ford 7.3 diesel - rudolphus : 8/6/2009 09:51
    - Re: To chip or not to chip 99 ford 7.3 diesel - jrmac : 8/6/2009 11:09
- Re: To chip or not to chip 99 ford 7.3 diesel - JD power : 8/6/2009 11:51
- Re: To chip or not to chip 99 ford 7.3 diesel - dt4020 : 8/6/2009 12:40
  - Re: To chip or not to chip 99 ford 7.3 diesel - stewa220 : 8/6/2009 13:38
- RE: To chip or not to chip 99 ford 7.3 diesel - WYDave : 8/6/2009 13:31
- Re: To chip or not to chip 99 ford 7.3 diesel - farmb0y : 8/6/2009 13:42

Freightliner truck Class - jackND : 8/6/2009 08:55
- Re: Freightliner truck Class - tommyw-5088 : 8/6/2009 08:59
- Re: Freightliner truck Class - KSUFarmer : 8/6/2009 10:37
  - Re: Freightliner truck Class - eddiedry : 8/6/2009 10:46
    - Re: Freightliner truck Class - citoriskeet : 8/6/2009 12:47
      - Re: Freightliner truck Class - dljtruck : 8/6/2009 17:09
        
        Re: Freightliner truck Class - KSUFarmer : 8/6/2009 20:37
        
        Re: Freightliner truck Class - plowboy : 8/6/2009 21:05

Turning up a NH 8670 - baler brian : 8/6/2009 08:43
- RE: Turning up a NH 8670 - Bern : 8/6/2009 09:39
  - Re: Turning up a NH 8670 - jrmac : 8/6/2009 11:16
    - Re: Turning up a NH 8670 - Bern : 8/6/2009 15:55
  - Re: Turning up a NH 8670 - Jeffery : 8/6/2009 12:14
    - Re: Turning up a NH 8670 - KingTut : 8/6/2009 15:32
    - Re: Turning up a NH 8670 - Bern : 8/6/2009 15:58
      - Re: Turning up a NH 8670 - jrmac : 8/6/2009 19:20
        
        Re: Turning up a NH 8670 - Ron..NE ILL..10/48 : 8/6/2009 20:13
        Re: Turning up a NH 8670 - Bern : 8/6/2009 21:27
- Re: Turning up a NH 8670 - bushton4 : 8/6/2009 23:01
- Re: Turning up a NH 8670 - jrmac : 8/7/2009 11:55

V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - iseedit : 8/6/2009 08:39
- RE: V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - ahay68979 : 8/6/2009 08:49
  - Re: V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - Chet Z : 8/6/2009 09:33
- RE: V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - hes_33 : 8/6/2009 10:45
  - RE: V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - iseedit : 8/6/2009 11:32
    - RE: V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - DevinF : 8/6/2009 14:19
  - RE: V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - GangGreen : 8/7/2009 01:02
- RE: V-Rakes / Wheel rakes rebuilding wheels - When, How ? ? ? - Larry in AB : 8/6/2009 14:26

JD 9610 monitor - golfer : 8/6/2009 08:24
- Re: JD 9610 monitor - PLO NW MN : 8/6/2009 09:49
  - Re: JD 9610 monitor - deerefever : 8/6/2009 10:24

Cash for Clunkers-Pickup trucks - micky b : 8/6/2009 07:31
- Re: Cash for Clunkers-Pickup trucks - bharzman : 8/6/2009 07:45
  - Re:scrap, are you sure? - dave morgan : 8/6/2009 15:19
  - Re: Cash for Clunkers-Pickup trucks - GangGreen : 8/7/2009 01:07
- Re: Cash for Clunkers-Pickup trucks - Jay NE Ohio : 8/6/2009 08:06
- RE: Cash for Clunkers-Pickup trucks - Jim Beam : 8/6/2009 08:22
- RE: Cash for Clunkers-Pickup trucks - Ron (Cen. IL.) : 8/6/2009 08:37
- What about the value of the clunker ??? - Curt Keiser : 8/6/2009 08:39
  - RE: And to add insult to injury . . . - iseedit : 8/6/2009 08:54
    - Re: Cash for Clunkers-Pickup trucks - ezzard : 8/6/2009 09:35

4240 Fuel Usage - jc8100 : 8/6/2009 06:52
- RE: 4240 Fuel Usage - carlton : 8/6/2009 09:21
  - RE: 4240 Fuel Usage - Bubbaspb : 8/6/2009 09:55
    - RE: 4240 Fuel Usage - hinfarm : 8/6/2009 10:02
- RE: 4240 Fuel Usage - RickB : 8/6/2009 18:09
- RE: 4240 Fuel Usage - RodInNS : 8/6/2009 18:44
  - 7710 hp - RickB : 8/6/2009 19:44
    - RE: 7710 hp - RodInNS : 8/7/2009 09:48
- Re: 4240 Fuel Usage - ronm : 8/6/2009 20:08
- Re: 4240 Fuel Usage - JDEEREMAN : 8/6/2009 21:33

Bad safety switch on JD 741 joystick - marten : 8/6/2009 01:18
- RE: Bad safety switch on JD 741 joystick - Roy@ranch : 8/6/2009 06:32
- RE: Bad safety switch on JD 741 joystick - JLynn : 8/6/2009 07:39
- RE: Bad safety switch on JD 741 joystick - L8Bloomer : 8/6/2009 07:45
- Re: Bad safety switch on JD 741 joystick - hellosugar : 8/6/2009 08:49

What is a CCP Test (CAT Semi Motor) - king cotton : 8/6/2009 00:18
- RE: What is a CCP Test (CAT Semi Motor) - Bern : 8/6/2009 00:49
  - RE: What is a CCP Test (CAT Semi Motor) - king cotton : 8/6/2009 00:56
    - RE: What is a CCP Test (CAT Semi Motor) - Bern : 8/6/2009 09:35
      - RE: What is a CCP Test (CAT Semi Motor) - king cotton : 8/6/2009 16:03
  - RE: What is a CCP Test (CAT Semi Motor) - CATGUY : 8/6/2009 20:09
    - RE: What is a CCP Test (CAT Semi Motor) - plowboy : 8/6/2009 21:02
      - RE: What is a CCP Test (CAT Semi Motor) - CATGUY : 8/6/2009 21:11
        
        RE: What is a CCP Test (CAT Semi Motor) - king cotton : 8/6/2009 22:26
        
        Re: What is a CCP Test (CAT Semi Motor) - eddiedry : 8/6/2009 22:38
        
        Re: What is a CCP Test (CAT Semi Motor) - king cotton : 8/7/2009 09:33
        
        Glider Kits>>>>>>>>>>>>>>>>>>>>>>. - eddiedry : 8/6/2009 22:41
        RE: What is a CCP Test (CAT Semi Motor) - CATGUY : 8/7/2009 20:44

Honey Bee Header in cool Weather.............. - Buckwheat : 8/6/2009 00:13
- RE: Honey Bee Header in cool Weather.............. - Dirtyfarmer : 8/6/2009 02:15
- Re: Honey Bee Header in cool Weather.............. - farmn4$ : 8/6/2009 03:56
- Re: Honey Bee Header in cool Weather.............. - Malleefarmer : 8/6/2009 05:01
  - Re: Honey Bee Header in cool Weather.............. - farmn4$ : 8/6/2009 12:05
    - Re: Honey Bee Header in cool Weather.............. - bigbear : 8/6/2009 12:36
- Re: Honey Bee Header in cool Weather.............. - macdon02 : 8/6/2009 12:56
- RE: I second a bad bearing - Redman : 8/6/2009 16:17
- RE: Thanks for replies, forgot to mention.... - Buckwheat : 8/6/2009 17:27
- Re: Honey Bee Header in cool Weather.............. - Malleefarmer : 8/6/2009 17:34
- RE: Runs like new now........................... - Buckwheat : 8/6/2009 19:30

CIH 1020 30ft. slave cyl on reel lift leaks down - king cotton : 8/5/2009 23:56
- Re: CIH 1020 30ft. slave cyl on reel lift leaks down - seedcleaner : 8/6/2009 09:18
- Re: CIH 1020 30ft. slave cyl on reel lift leaks down - bin buster : 8/6/2009 14:51
  - Re: CIH 1020 30ft. slave cyl on reel lift leaks down - Jon Hagen : 8/6/2009 21:34

Quilt on corn pics - sprayerguy : 8/5/2009 23:56
- Re: Quilt on corn pics - oilmaster : 8/6/2009 00:07
- Re: Quilt on corn pics - swne : 8/6/2009 00:11
  - Re: Quilt on corn pics - sprayerguy : 8/6/2009 08:41
- RE: Quilt on corn pics - Oliver1 : 8/6/2009 00:19
- Re: Quilt on corn pics - Muddy : 8/6/2009 00:33
  - why not? - dvswia : 8/6/2009 08:16
    - RE: why not? - dave morgan : 8/6/2009 15:52
  - Re: Quilt on corn pics - Cougar : 8/6/2009 08:34
    - Re: Quilt on corn pics - bowtieighth : 8/6/2009 10:05
      - Re: Quilt on corn pics - sprayerguy : 8/6/2009 10:22
        
        Re: Quilt on corn pics - loran : 8/6/2009 10:53
        
        While you're thinking... - bowtieighth : 8/6/2009 11:03
        Re: Quilt on corn pics - sprayerguy : 8/6/2009 11:13
        
        Re: Quilt on corn pics - bowtieighth : 8/6/2009 11:26
        
        No more lift kits - pilgrim : 8/6/2009 13:41
- Re: Quilt on corn pics - semosandfarmer : 8/6/2009 02:25
- Okay guys, give him a break. - Tim Cooke : 8/6/2009 11:09
- RE: Quilt on corn pics - ndarbuckle : 8/6/2009 12:15
  - Re: Quilt on corn pics - sprayerguy : 8/6/2009 13:01
- Re: Quilt on corn pics - avaitor : 8/6/2009 12:46
- One more Q - Oliver1 : 8/6/2009 13:45
  - Re: Quilt on corn pics - sprayerguy : 8/6/2009 14:24
    - Re: Quilt on corn pics - OKPanhandler : 8/6/2009 22:00
      - Re: Quilt on corn pics - sprayerguy : 8/7/2009 09:57
    - Re: Quilt on corn pics - McCartman : 8/6/2009 22:27
- RE: Quilt on corn pics...question - Ron..NE ILL..10/48 : 8/6/2009 20:17
- Re: Quilt on corn pics - FactoryFarmer : 8/12/2009 11:40

Ford Backhoe opinions - MarlandS : 8/5/2009 23:25
- Re: Ford Backhoe opinions - bollpuller : 8/5/2009 23:30
  - Re: Ford Backhoe opinions - TS79 : 8/6/2009 00:41
- RE: Ford Backhoe opinions - CRJ : 8/6/2009 06:56
- Good machines - BBfarms : 8/6/2009 07:36
  - RE: Good machines - RickB : 8/6/2009 18:14
    - RE: Rick - BBfarms : 8/6/2009 18:32
      - RE: Bill - RickB : 8/6/2009 19:49
- RE: Thanks - MarlandS : 8/6/2009 13:26
  - RE: Thanks - dave morgan : 8/6/2009 16:02
- RE: Ford Backhoe opinions - shucks : 8/6/2009 21:32

2144 hydro weak - TORQUE : 8/5/2009 23:04
- RE: 2144 hydro weak - Jon : 8/5/2009 23:16
- Re: 2144 hydro weak - Jon Hagen : 8/5/2009 23:18
  - Re: 2144 hydro weak - Buster 50 : 8/6/2009 08:52
    - Re: 2144 hydro weak - Jon Hagen : 8/6/2009 09:55
      - Re: 2144 hydro weak - Buster 50 : 8/6/2009 18:53
        
        Re: 2144 hydro weak - Jon Hagen : 8/6/2009 20:25

JD 9760 STS - ILikeTrimble : 8/5/2009 22:51
- RE: JD 9760 STS - Steiger Man : 8/6/2009 00:03
  - RE: JD 9760 STS - Gary Lyon : 8/6/2009 00:52
- RE: JD 9760 STS - deeredriver : 8/6/2009 00:28
- Re: JD 9760 STS - ststech : 8/6/2009 07:28
  - Re: JD 9760 STS - deerefever : 8/6/2009 10:27
- RE: JD 9760 STS - NL97 : 9/9/2020 21:44

Acres per Combine - conrad : 8/5/2009 22:47
- RE: Acres per Combine - Jon : 8/5/2009 22:54
  - RE: question answered - dave morgan : 8/6/2009 16:11
- Re: Acres per Combine - Fred : 8/5/2009 23:11
  - Re: Acres per Combine - conrad : 8/5/2009 23:34
- RE: Acres per Combine - IL Deere Driver : 8/5/2009 23:43
- RE: Acres per Combine - Steiger Man : 8/6/2009 00:06
- Re: Acres per Combine - Sidehill : 8/6/2009 00:21
- Re: Acres per Combine - Land_Surfer : 8/6/2009 00:39
- Re: Acres per Combine - farmn4$ : 8/6/2009 04:09
  - Re: Acres per Combine - jbweston : 8/6/2009 07:12
    - Re: Acres per Combine - Clay SEIA : 8/6/2009 11:26
    - Re: Acres per Combine - farmn4$ : 8/6/2009 12:02
      - Re: Acres per Combine - jbweston : 8/6/2009 21:33
        
        Re: Acres per Combine - farmn4$ : 8/6/2009 22:59
        
        Re: Acres per Combine - Clay SEIA : 8/7/2009 09:42
        
        Re: Acres per Combine - jbweston : 8/7/2009 23:46
- Re: Acres per Combine - superfarmer : 8/6/2009 07:34
- RE: Acres per Combine - Ontrack : 8/6/2009 10:44
- Re: Acres per Combine - dt4020 : 8/6/2009 12:49

JD 2300 mulcher width - hb35 : 8/5/2009 22:32
- RE: JD 2300 mulcher width - SFO : 8/5/2009 23:01
- Re: JD 2300 mulcher width - Coastal : 8/5/2009 23:26
- Re: JD 2300 mulcher width - scmen9200 : 8/6/2009 11:27
- Re: JD 2300 mulcher width - jdchevy25 : 8/7/2009 08:58

Greasing JD Cornhead Gearbox - conrad : 8/5/2009 22:21
- Re: Greasing JD Cornhead Gearbox - BHTN : 8/5/2009 22:26
  - Re: Greasing JD Cornhead Gearbox - Manteno Mark : 8/6/2009 08:27
- Re: Greasing JD Cornhead Gearbox - jeffshelby : 8/5/2009 22:33
- RE: Greasing JD Cornhead Gearbox - oilmaster : 8/5/2009 23:05
- Re: Greasing JD Cornhead Gearbox - Fred : 8/5/2009 23:14
  - Re: Greasing JD Cornhead Gearbox - Earthworm : 8/5/2009 23:26
    - An electric grease gun or similar is a must. - farmboy99 : 8/6/2009 09:21
      - RE: An electric grease gun or similar is a must. - IOWAMARK : 8/6/2009 10:42
- Re: Greasing JD Cornhead Gearbox - superfarmer : 8/6/2009 07:37
- Re: Greasing JD Cornhead Gearbox - irethanolman : 8/6/2009 11:16
- Re: Greasing JD Cornhead Gearbox - myfarm : 8/6/2009 19:28
  - Re: Greasing JD Cornhead Gearbox - sport : 8/6/2009 20:49

JD 9500 unloading auger - deere8330 : 8/5/2009 22:15
- RE: JD 9500 unloading auger - JLynn : 8/5/2009 22:26
- Re: JD 9500 unloading auger - Lil' Hoss : 8/5/2009 22:29
  - Re: JD 9500 unloading auger - sport : 8/6/2009 20:50
    - Re: JD 9500 unloading auger - deere8330 : 8/6/2009 22:11

2388 electric problem - mike-MT : 8/5/2009 22:12
- Re: 2388 electric problem - rollinghills : 8/5/2009 22:57
- Re: 2388 electric problem - Badger : 8/5/2009 23:52
  - Re: 2388 electric problem - mike-MT : 8/6/2009 07:38
    - Re: 2388 electric problem - mike-MT : 8/6/2009 18:34

New Holland TR99 header adaptor same as 2388? - tommy1993 : 8/5/2009 22:10
- Re: New Holland TR99 header adaptor same as 2388? - jrmac : 8/6/2009 11:33

Corn Dryer - milanboy : 8/5/2009 21:58
- Re: Corn Dryer - 77 Farmer : 8/5/2009 22:14
  - Re: Corn Dryer - milanboy : 8/5/2009 22:27
    - Re: Corn Dryer - bulldog : 8/5/2009 23:17
      - Re: Corn Dryer - Ogoki : 8/6/2009 07:10

2004 Chevy HD driveshaft problems - Magnum8910 : 8/5/2009 21:54
- Re: 2004 Chevy HD driveshaft problems - FP Tractor : 8/5/2009 22:40
  - Re: 2004 Chevy HD driveshaft problems - dutch : 8/5/2009 22:49
- Re: 2004 Chevy HD driveshaft problems - srsu99 : 8/5/2009 23:49
- RE: 2004 Chevy HD driveshaft problems - Indianajones : 8/6/2009 07:02
  - you've got it right. - new1680 : 8/6/2009 11:18
    - Re: 2004 Chevy HD driveshaft problems - srsu99 : 8/6/2009 23:12
      - Re: 2004 Chevy HD driveshaft problems - new1680 : 8/7/2009 13:30

Hauling round bales with a stack mover - Sheep Herder : 8/5/2009 21:44
- RE: Hauling round bales with a stack mover - jamiebenz : 8/6/2009 09:02

1997 chevy 6.5 diesel. - tommyw-5088 : 8/5/2009 21:42
- RE: 1997 chevy 6.5 diesel. - hillfarmer : 8/5/2009 21:46
- Re: 1997 chevy 6.5 diesel. - TXCUTTER : 8/5/2009 22:17
- RE: 1997 chevy 6.5 diesel. - sdPete : 8/5/2009 23:26
- Re: 1997 chevy 6.5 diesel. - Chevy6_2 : 8/6/2009 00:29
- Re: 1997 chevy 6.5 diesel. - chrisk1500 : 8/6/2009 19:04
  - Re: 1997 chevy 6.5 diesel. - Chevy6_2 : 8/7/2009 11:01

For what it's worth.... - Old Red : 8/5/2009 21:38

single disk dry fertilizer opener ??? - farmerred : 8/5/2009 21:05
- RE: single disk dry fertilizer opener ??? - msb : 8/5/2009 21:27
  - RE: single disk dry fertilizer opener ??? - farmerred : 8/6/2009 06:37
    - Re: single disk dry fertilizer opener ??? - klc : 8/7/2009 19:11

Headsight's row guidance - farminguy : 8/5/2009 20:53
- Re: Headsight's row guidance - T800 : 8/5/2009 21:26
- RE: Headsight's row guidance - Ron..NE ILL..10/48 : 8/6/2009 06:36
  - RE: Headsight's row guidance - midwestag : 8/6/2009 19:28
    - RE: Headsight's row guidance - Jacob Bolson : 8/6/2009 23:41
      - RE: Headsight's row guidance- Cost? - redfarm : 8/7/2009 09:54
        
        Re: Headsight's row guidance - farminguy : 8/8/2009 00:02

NH 851 value - garyncia : 8/5/2009 20:48
- RE: NH 851 value - Sheep Herder : 8/5/2009 21:26
  - RE: NH 851 value - feelnrite : 8/5/2009 21:46
- RE: NH 851 value - Brian Helgeson : 8/5/2009 23:13

Rawson zone-till (triple coulter) - Pfarms : 8/5/2009 20:32
- Re: Rawson zone-till (triple coulter) - loran : 8/5/2009 20:39
  - Re: Rawson zone-till (triple coulter) - Pfarms : 8/5/2009 22:06
    - Re: Rawson zone-till (triple coulter) - loran : 8/5/2009 22:13
      - Re: Rawson zone-till (triple coulter) - Pfarms : 8/5/2009 22:25
        
        Re: Rawson zone-till (triple coulter) - loran : 8/5/2009 22:38
  - Re: Rawson zone-till (triple coulter) - greasegun : 8/5/2009 23:03
- RE: Rawson zone-till (triple coulter) - fendt716 : 8/5/2009 21:28
- RE: Rawson zone-till (triple coulter) - pat-michigan : 8/5/2009 21:35
  - Re: Rawson zone-till (triple coulter) - 4ethanol : 8/5/2009 21:43
  - RE: Rawson zone-till (triple coulter) - Pfarms : 8/5/2009 22:02
- Dawn strip till - JohnW : 8/6/2009 01:49
- RE: Rawson zone-till (triple coulter) - Ron..NE ILL..10/48 : 8/6/2009 06:53
  - RE: Rawson zone-till (triple coulter) - Pfarms : 8/6/2009 08:01
    - RE: Rawson zone-till (triple coulter) - pat-michigan : 8/6/2009 08:18

Where can I buy a bulk oil pump, meter and hose. - deereman : 8/5/2009 20:23
- RE: Where can I buy a bulk oil pump, meter and hose. - mutt : 8/5/2009 20:33
- RE: Where can I buy a bulk oil pump, meter and hose. - JLynn : 8/5/2009 20:35
  - Re: Where can I buy a bulk oil pump, meter and hose. - CaseFarmer : 8/5/2009 20:40
    - Re: Where can I buy a bulk oil pump, meter and hose. - PLO NW MN : 8/5/2009 21:12
- RE: Where can I buy a bulk oil pump, meter and hose. - Delmarva Ag : 8/6/2009 20:20
  - RE: Where can I buy a bulk oil pump, meter and hose. - Harley : 8/6/2009 20:55

Case IH reman agrimax egines - 3w farms : 8/5/2009 20:21
- Re: Case IH reman agrimax egines - Pofarmer : 8/5/2009 20:42
  - Re: Case IH reman agrimax egines - Jon Hagen : 8/5/2009 21:59
- RE: Case IH reman agrimax egines - RICK NCMD : 8/5/2009 21:45
  - RE: Case IH reman agrimax egines - burdette : 8/5/2009 21:54
- Re: Case IH reman agrimax egines - whitmore : 8/5/2009 23:31
- RE: Case IH reman agrimax egines - RickB : 8/6/2009 05:40

4710 boom question - pnut : 8/5/2009 20:16
- Re: 4710 boom question - Lil' Hoss : 8/5/2009 22:55
- RE: 4710 boom question - Duck : 8/5/2009 22:59
- Re: 4710 boom question - dutch : 8/5/2009 23:01
- RE: 4710 boom question - greg33 : 8/5/2009 23:25

Maximizing 1 9600 in 2000 ac of soybeans? - jbweston : 8/5/2009 19:54
- RE: Maximizing 1 9600 in 2000 ac of soybeans? - farmn4nutn : 8/5/2009 20:12
  - Re: Maximizing 1 9600 in 2000 ac of soybeans? - swne : 8/5/2009 20:18
    - Re: Maximizing 1 9600 in 2000 ac of soybeans? - DevinF : 8/5/2009 22:46
    - Re: Maximizing 1 9600 in 2000 ac of soybeans? - beh : 8/6/2009 11:10
- Re: Maximizing 1 9600 in 2000 ac of soybeans? - loran : 8/5/2009 20:33
  - Re: Maximizing 1 9600 in 2000 ac of soybeans? - Brandon SWIA : 8/5/2009 20:36
    - Re: Maximizing 1 9600 in 2000 ac of soybeans? - loran : 8/5/2009 21:06
- RE: Maximizing 1 9600 in 2000 ac of soybeans? - Brandon SWIA : 8/5/2009 20:39
  - Re: Maximizing 1 9600 in 2000 ac of soybeans? - PLO NW MN : 8/5/2009 21:17
- Re: Maximizing 1 9600 in 2000 ac of soybeans? - Jason Hinson : 8/5/2009 21:17
- RE: Maximizing 1 9600 in 2000 ac of soybeans? - burdette : 8/5/2009 21:24
- Re: Maximizing 1 9600 in 2000 ac of soybeans? - Angus : 8/5/2009 21:51
- Re: Maximizing 1 9600 in 2000 ac of soybeans? - JK SCLA : 8/5/2009 22:13
- Re: Maximizing 1 9600 in 2000 ac of soybeans? - 801486 : 8/5/2009 22:17
- RE: Maximizing 1 9600 in 2000 ac of soybeans? - NEMOScott : 8/5/2009 22:18
- Re: Maximizing 1 9600 in 2000 ac of soybeans? - bigbear : 8/5/2009 22:53
- RE: Maximizing 1 9600 in 2000 ac of soybeans? - cotman : 8/5/2009 23:39
  - RE: Maximizing 1 9600 in 2000 ac of soybeans? - ahay68979 : 8/6/2009 00:30
- Re: Maximizing 1 9600 in 2000 ac of soybeans? - jbweston : 8/6/2009 07:18
  - Re: 28 years old? - cotman : 8/6/2009 07:46
    - Re: Maximizing 1 9600 in 2000 ac of soybeans? - jbweston : 8/6/2009 22:17
- RE: Maximizing 1 9600 in 2000 ac of soybeans? - pbutler : 8/6/2009 14:51
  - RE: Maximizing 1 9600 in 2000 ac of soybeans? - farmerpete2400 : 8/6/2009 17:29

9600 année: 1990 - Etienne : 8/5/2009 19:40
- Re: 9600 année: 1990 - motram5455 : 8/6/2009 13:43
  - Re: 9600 année: 1990 - Etienne : 8/6/2009 14:10
  - Re: 9600 année: 1990 - Etienne : 8/6/2009 15:13

Challenger days at duquoin il. - earnhart sil : 8/5/2009 18:52
- Re: Challenger days at duquoin il. - movinahead : 8/5/2009 19:07
  - Re: Challenger days at duquoin il. - CaseFarmer : 8/5/2009 19:12
  - Re: Challenger days at duquoin il. - earnhart sil : 8/5/2009 19:22
    - Re: Challenger days at duquoin il. - CaseFarmer : 8/5/2009 19:45
  - Re: Challenger days at duquoin il. - 66Chevy : 8/7/2009 09:56

Strip-Till $$$ - Smoothlander : 8/5/2009 18:47
- Re: Strip-Till $$$ - mit9750 : 8/5/2009 21:45
- Re: Strip-Till $$$ - 4ethanol : 8/5/2009 21:49
- RE: Strip-Till $$$ - deerefriend : 8/5/2009 21:53
  - Re: Strip-Till $$$ - Smoothlander : 8/5/2009 22:50
- Re: Strip-Till $$$ - Angus : 8/5/2009 21:55
- RE: Strip-Till $$$ - Old#7 : 8/5/2009 23:12
- RE: Are We Stupid at $76/acre - hes_33 : 8/5/2009 23:28
  - RE: Are We Stupid at $76/acre - Smoothlander : 8/5/2009 23:30
    - RE: Are We Stupid at $76/acre - hes_33 : 8/5/2009 23:33
      - Re: Strip-Till $$$ - Smoothlander : 8/5/2009 23:36
        
        Re: Strip-Till $$$ - candyo1955 : 8/6/2009 06:42
        Re: Strip-Till $$$ - hes_33 : 8/6/2009 10:54
  - Re: Strip-Till $$$ - Badger : 8/6/2009 15:25
    - Re: Strip-Till $$$ Something else - Badger : 8/6/2009 23:44

Anyone near Auburn, Nebraska - iluvafarmer : 8/5/2009 17:44
- RE: Anyone near Auburn, Nebraska - senebfrmer : 8/6/2009 00:36
  - Re: Anyone near Auburn, Nebraska - iluvafarmer : 8/6/2009 01:31

JD 3010 cranks slow - simple man : 8/5/2009 17:40
- RE: JD 3010 cranks slow - Trent2520 : 8/5/2009 17:55
  - Re: JD 3010 cranks slow - Jon Hagen : 8/5/2009 18:07
    - Re: JD 3010 cranks slow - simple man : 8/5/2009 18:27
      - Re: JD 3010 cranks slow - Gerald J. : 8/5/2009 18:29
        
        Re: JD 3010 cranks slow - Jon Hagen : 8/5/2009 22:05
- Re: JD 3010 cranks slow - Gerald J. : 8/5/2009 18:28
  - Re: JD 3010 cranks slow - simple man : 8/5/2009 18:46
    - Re: JD 3010 cranks slow - Gerald J. : 8/5/2009 19:37
      - Re: Just rebuilt ours - Paul(WI) : 8/6/2009 08:06
  - Re: JD 3010 cranks slow - superfarmer : 8/5/2009 21:51
    - Re: JD 3010 cranks slow - JasoninMN : 8/5/2009 22:12
      - Re: JD 3010 cranks slow - Gerald J. : 8/5/2009 23:30
      - Re: JD 3010 cranks slow - superfarmer : 8/6/2009 07:24
        
        Re: JD 3010 cranks slow - tedbear : 8/6/2009 08:01

Tractor Ballasting - Jmark71 : 8/5/2009 17:34
- RE: Tractor Ballasting - Big Blue : 8/5/2009 18:13

4020 powershift value? - CRJ : 8/5/2009 17:32
- Re: 4020 powershift value? - msb : 8/5/2009 18:22
  - Re: 4020 powershift value? - Gerald J. : 8/5/2009 18:31

Cleaning Sprayer - gopher : 8/5/2009 17:25
- RE: Cleaning Sprayer - CRJ : 8/5/2009 17:34
  - RE: Cleaning Sprayer - gopher : 8/5/2009 18:20
- Re: Cleaning Sprayer - dutch : 8/5/2009 20:09
  - Re: Cleaning Sprayer - dutch : 8/6/2009 07:14

Flatbed for Dodge Ram 2500 - jmhuz3 : 8/5/2009 17:11
- Re: Flatbed for Dodge Ram 2500 - mai-ag : 8/5/2009 18:20
  - Re: Flatbed for Dodge Ram 2500 - king cotton : 8/5/2009 23:29

8010 Case IH 2007 combine - tractor tom : 8/5/2009 16:50
- RE: 8010 Case IH 2007 combine - 7010 : 8/5/2009 18:50
- RE: 8010 Case IH 2007 combine - Stick-eye : 8/5/2009 23:50

Bosch injection pump for 2388's - ry0972 : 8/5/2009 16:44
- RE: Bosch injection pump for 2388's - msb : 8/5/2009 18:24
  - RE: Bosch injection pump for 2388's - ry0972 : 8/6/2009 01:23

FS 30ft Grain bin - CIA42 : 8/5/2009 15:53
- Re: FS 30ft Grain bin - cocodrie : 8/5/2009 18:49
  - Re: FS 30ft Grain bin - CIA42 : 8/6/2009 10:26
- Re: FS 30ft Grain bin - jgriffith11 : 8/5/2009 19:02

Feterl augers - Dave NCMO : 8/5/2009 15:37
- RE: Feterl augers - Cliff SEIA : 8/5/2009 16:12
  - Re: Feterl augers - Ed Winkle : 8/5/2009 16:25
    - Re: Feterl augers - Kooiker : 8/5/2009 21:10
  - RE: Feterl augers - Oliver1 : 8/5/2009 16:59
    - RE: Feterl augers - Cliff SEIA : 8/5/2009 18:27
      - RE: Feterl augers - 7010 : 8/5/2009 18:54
        
        RE: Feterl augers - JD_ripper : 8/5/2009 20:03
        
        RE: Feterl augers - IL Deere Driver : 8/5/2009 21:04
- Re: Feterl augers - Fred : 8/5/2009 21:24
- RE:I am still waiting - TerryWimp : 8/5/2009 21:35
- RE: Feterl augers - Silver Shoes : 8/5/2009 21:46
- Re: Feterl augers - Fred : 8/5/2009 22:56
- Re: Feterl augers - NH farmer : 8/6/2009 00:03

Jump to page: < 9125 9126 9127 9128 9129 9130 ... 9131 9132 9133 9134 9135 9136 9137 ... > Forums List -> Machinery Talk
(Search this forum)

(Delete cookies)