|
Callao Missouri | Run to the neighbors, hook up to their head, try operation, if it works, pull the wire harness out of your head and replace it, or find the broken wire, chances are it is the power wire if none of the postions work.
If you neighbors head does not work also you have a combine issue, there is a decal on the inside of the left gall wing door that tells you which is the dialmatic valve, and the latching valve. check both coils for magnetism with a 9/16" wrench, start following basic diagnostics and you will find the problem, don't just replace parts because that wont get you anywhere. Jon | |
|
JD 9600 dial a matic problems: Where to begin.
