|
| I agree with the other replys about the Harvestor. If you have one existing they're OK at best. I put a floor and sweep auger in mine but it is kind of tricky because of the glass lining on the steel you can't drill holes in it or you lose your corrosion resistance. I had to cut the floor precisely and rebend my flashing it was a bit of a pain. The other problem is the blue really soaks up the sun and makes for a lot of heat on the sides and you get a lot of temperature flucuation and therefore condensation which is bad too. I use mine mainly as a wet storage structure and then some overflow when we get done. If you empty it out early in the winter it's not really a problem. The other problem is the acess hole is too small and you can't really cut in a bigger one because of the glass lining situation again. Good luck | |
|
Taking down a Harvestore
