|
Mid-East Nebraska | When you have the MFWD switch in Auto and when you step on the brake and it while shut the MFWD off, so that it will not pull and also turn better. The front end has a limited slip differental, that is it has a set of disks in the differental that will slip if it has a heavy load on it, like turning with it pulling, so that is why you should replace the oil in the hubs and center and check for metal, so use clean buckets. The hubs use 85/140 gear lube and the center HyGard. Check your u-joints on the drive shaft and on the axle shafts to the hubs. | |
|