|
| I had a bent and broken bracket (throttle cable) on the bottom of my 4450 that I fixed and now I need to re adjsut the speed and travel of the cable / linkage of the throttle. It seemed to travel too far before and was bending the bracket on the cable till it broke under the cab.What is the correct way to do this and where do I do the adjusting.What speed?Is there adjusters inside the cab under the counsole that limits the travel of the throttle linkage instead of the cable dead ending in to the pump travel?That seems to be what is breaking the bracket.
It is hard for a big buy to work in theese tight places , my hands could be smaller and longer too! | |
|