Viewing a thread - Replacing concave in 9600

Forums | Classifieds (201) | Skins | Language

You are logged in as a guest. ( logon | register )

Replacing concave in 9600	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

DevinF

Posted 7/14/2006 13:23 (#26557)
Subject: Replacing concave in 9600

I'm replacing the concave in my 9600 and most people say to go from a 14 bar to a 13 bar concave.
So I ordered a 13 bar from st johns welding and now I am being told by several people that I need to change the front angle or it wont work.

Was wondering if anyone had done this ever and what all I have to change?

Thanks,
Devin Ferguson

Replacing concave in 9600 - DevinF : 7/14/2006 13:23
- I sent that crap back!!! - JK SCLA : 7/14/2006 13:38
  - RE: I sent that crap back!!! - Seppie : 7/14/2006 16:26
    - RE: I sent that crap back!!! - DevinF : 7/14/2006 17:00
  - RE: I sent that crap back!!! - plowboy : 7/14/2006 19:10
    - The concave was cracked and. plowboy - JK SCLA : 7/14/2006 19:33
      - RE: The concave was cracked and. plowboy - dave morgan : 7/14/2006 22:58
        
        RE: The concave was cracked and. plowboy - plowboy : 7/14/2006 23:38
        I quit bitching - Rich : 7/16/2006 00:17
        
        RE: I quit bitching - plowboy : 7/16/2006 16:20
        RE: I quit bitching, I doubt it! :) - dave morgan : 7/16/2006 19:19
        
        mu, mah, maa, maaaa, maaaa, massey Furguson....... - Guest : 7/17/2006 00:19
        
        RE: mu, mah, maa, maaaa, maaaa, massey Furguson....... - Doc Egor : 7/17/2006 09:08
      - RE: The concave was cracked and. plowboy - plowboy : 7/14/2006 23:36
        
        RE: The concave was cracked and. plowboy - sek farmer : 7/15/2006 08:25
        
        Re: Replacing concave in 9600 - pat-michigan : 7/15/2006 08:40
      - Reread, brought a laugh for some reason - plowboy : 7/15/2006 13:51
        
        RE: Reread, brought a laugh for some reason - plainsdrifter : 7/15/2006 14:03
        
        RE: Reread, brought a laugh for some reason - plowboy : 7/15/2006 14:47
        
        Re: Replacing concave in 9600 - Greywolf : 7/16/2006 07:13
  - RE:Lowen Concaves - Hop-a-long : 7/15/2006 14:02
    - RE:Lowen Concaves - plowboy : 7/15/2006 14:53
      - RE:Lowen Concaves - DevinF : 7/15/2006 18:30
    - RE: I was wrong. - Hop-a-long : 7/16/2006 21:42

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)