|
Somerville, Indiana | We have a Mack with outboard drums, changed studs after removing the whole wheel assembly = turned out the easiest for us...easier for me to swing a hammer down than sideways.
you really need a dual wheel dolley, can make one out of a sheet of greasey tin if you don't want to make a dolley...that way you can lay the wheels back on the drums and hub, then mount to axle without breaking your back bending over to install hubs and drums.
PS: Replace all studs at the same time...L will be on the end of the wheel studs if they are left handed, R if otherwise. | |
|
removal of bud wheel studs?
