Posted 12/12/2024 05:35 (#11005491 - in reply to #11005114) Subject: RE: Need some advice fellers
RCD - 12/11/2024 18:37
Take a short section of metal pipe that the OD will slide into the hole, then weld the ID of the pipe to the bolt. A stick welder may be necessary based on the length of pipe you have.
Can drill bigger portion of it out, then take pipe like RCD said and weld it internally to the bolt. Lube it and turn it out. Lot easier to use old school stick welder.
Need some advice fellers
