|
Callao Missouri | Slide the biggest nut that will go in the hole in there and weld the heck out of it to the bolt. Then weld washer on the nut, and another nut on top. gets to be quite the process. If that don't work you can probably torch them out and re tap the holes
If you decide to drill one out, Drive a big old impact Allan wrench socket in there with a hammer and use impact to back it out. I've had the same old set of napa 1/2" drive Allan sockets for years and I've never damaged one driving it into a drilled out bolt or plug. It doesn't always work, but most times it will.
Edited by Jon 12/11/2024 20:53
| |
|
Need some advice fellers
