|
| Chris you were correct I love to run the Drago. There is so little loss from the head & combine. I ended up taking the brackets off the front of the row units as we had a field of down corn. I did end up ordering a headsight 2 sensor header control kit & installing. This corn head takes in ears only & increased our harvesting speed with no loss out the back. I should have had this years ago. For next year I will install my Devastators on the Drago. The only thing I don't like about it is the end divider hoods as leaning corn comes. off the snout & hairpins & eventually falls off. Not sure if tall corn shields would help or need to have a nice curve from the snout to the back of the head instead of a sharp transition. Another issue I need resolved is the headsight sensor arm when running low to the ground it pushes leaves & eventually starts raising the snout. It looks like the gap between the snout point & sensor bracket needs filled in with something.
Edited by twinstacks 11/3/2024 17:11
| |
|
Gleaner 3000 cornhead
