Viewing a thread - Replacing the auger tube on an 8", 62' Westfield auger

Forums | Classifieds (132) | Skins | Language

You are logged in as a guest. ( logon | register )

Replacing the auger tube on an 8", 62' Westfield auger	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

tkoppel

Posted 9/18/2024 08:34 (#10894825 - in reply to #10894611)
Subject: RE: Replacing the auger tube on an 8", 62' Westfield auger

Sanilac Co. Michigan

Thanks for all the replies.

Part of the plan would be to have our local steel guy roll and make the three tube sections. I have to believe that would be cheaper than buying replacement Westfield tubes, considering shipping and all. I'd cut the hardware off the old tubes and weld it onto the replacements.

Not an afternoon project, I know.

Replacing the auger tube on an 8", 62' Westfield auger - tkoppel : 9/17/2024 18:25
- RE: Replacing the auger tube on an 8", 62' Westfield auger - MX255 : 9/17/2024 18:42
  - RE: Replacing the auger tube on an 8", 62' Westfield auger - dschilling92887 : 9/17/2024 19:03
  - RE: Replacing the auger tube on an 8", 62' Westfield auger - gregrundell : 9/17/2024 20:56
- RE: Replacing the auger tube on an 8", 62' Westfield auger - Bigshot : 9/17/2024 20:41
- RE: Replacing the auger tube on an 8", 62' Westfield auger - Shortone : 9/18/2024 04:59
- RE: Replacing the auger tube on an 8", 62' Westfield auger - Big L : 9/18/2024 05:21
  - RE: Replacing the auger tube on an 8", 62' Westfield auger - tkoppel : 9/18/2024 08:34

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)