Southern PA | zach_deerefan - 9/17/2024 03:58
Bad circuit board in corner post. I’ve sent the whole corner post of to ag express and they fixed it for around $400. Downfall is it took almost two weeks
It could well be a bad corner post circuit board. However, when we were having similar issues on our 9660, it ended up being a poor electrical connection at the corner post circuit board. Plugged and unplugged the connector several times after we initially unplugged the connector and sprayed the connector terminals with electronic contact cleaner, and it's been working great ever since.
I'd check your corner post circuit board connector terminals closely for any obvious issues, like a pin pushed back, corrosion, etc. Also check for any chafing issues, etc., on the wiring to the connector. If all that looks good, try plugging and unplugging the connector several times. It may straighten it up. It doesn't cost much at all to try this, for sure! |