Winkler, Manitoba Canada | Super77 - 9/15/2024 21:01
Yes this would be a permanent change. I plan on running it with the tractor in the fertilizer spreader so lots of hydraulic flow available. Yes it is 540rpm currently
If it is a permanent change, I would try to find a motor that has a shaft that matches the size on the conveyor and use a clamping shaft coupler for power transmission. Then a simple torque arm on the motor to prevent rotation is all you need.
https://www.mcmaster.com/products/shaft-couplers/shaft-couplings-2~/... |
How to size a hydraulic motor
