ccjersey - 9/15/2024 19:30
bleedgreen720 - 9/13/2024 22:45
Capping the lines was a breeze with my amazon jic and orfs cap and plug kit. That kit has made my life much easier and paid for itself in spilled oil.
So you basically spear it from the front and hang it off the forks no chains needed to the back ?
Yes, there seems to be plenty of meat in the top to not bend where the tips of the forks bear underneath it. Only problem I have is my 1845C Case is almost too small. Next time I take it off I may try lifting underneath the faceplate and chaining the upper end back to the backstop on my fork attachment like the picture below. I think that might give a little more capacity by having more weight closer to the loader. Have done it the other way just with the forks stuck in over the drum twice but it’s marginal with the 9600 feederhouse.
JD 9600 Feederhouse
