|
Wisconsin | https://www.youtube.com/watch?v=X2CZUcnCCSg&t=213s
There's this way, I'd never try that way, but anything that presses it on evenly should work, if you can tighten the harmonic balancer bolts completely evenly with two wrenches at the same time, or tiny steps. If you're going to use a hammer, use something flat and hit in the middle, not back and forth like that video. The thin ones with a lip want to be pushed on the lip, not from end like the video, looks like that one is thicker hardened steel, not SS like the thin ones. | |
|
7120 Front Crankshaft Seal
