|
Ontario, Canada | the feedback position sensor on the implement is shorting out or has poor connection. check the 6 pin connector at back of the tractor that the feedback sensor plugs into
4353 - EHR FB 1 Shorted to High Source
Cause :
Sensor feedback voltage was greater than 4.5 V.
Possible failure modes :
Faulty connector
Faulty harness
Faulty implement pot
 (pot (full).JPG)
Attachments
----------------
 pot (full).JPG (78KB - 1 downloads)
| |
|
4353 error code on 310 magnum
