|
Ontario, Canada | the switch you are discussing does not exist on a electronic engine. it is all handled by the ecm and the run enable relay. see attached wire diagram
makes me wonder if you don't have a bad ground or if the ECM is failing internally
frame from 2006 and after HAJ0295001 2388
Edited by redtractor2 9/12/2024 22:08
(engine controller highlight (full).JPG)
(switch (full).JPG)
Attachments ---------------- engine controller highlight (full).JPG (100KB - 2 downloads) switch (full).JPG (93KB - 2 downloads)
| |
|