|
| I have a manual at my shop I can look at tomorrow and see if it shows the weight. You’re probably right about not having enough weight in front for 6 bottom. The 165’s can adjust the pitch on the bottoms for a more or less aggressive bite. I use the less aggressive setting because I don’t want to go as deep and it pulls a lot easier. The closest tractor to a 4455 that I’ve pulled it with was an International 5488 mfd. It was all it could handle pulling it in the aggressive setting in our heavy SE Nebraska clay on terraces. It always got the job done though. I didn’t know about the plow’s different settings back then, probably would have worked a lot better in the less aggressive setting. | |
|
Case IH 165 plow & JD 4455
