just a tish NE of central ND | The add on chaff spreaders were plumbed the same way at the same location.The two hoses from the hydraulic motor you are adding are hooked up between the hydraulic couplers for the reel that are by the feeder house oil pump. You simply disconnect the pressure side hose and hook the buble up hoses together in a series with the reel motor and pump. The simplest is to use pioneer ends on the bubble up hoses to plug them together.So you unplug the reel pressure hose and plug in one buble up hose.The remaing buble up hose gets plugged together with the reel drive hose you initially unplugged. That makes a series connection for the oil flow.
Edited by School Of Hard Knock 9/10/2024 09:41
|
Plumbing bubble up auger on 2388
