|
West Central IL | Just make one. Make the spoon 6" or so deep. That way iwhen bucket is curled in some it will still have good spoon depth. I just bolt them on between the spade teeth on the bucket. With the midi excavator it bolts behind the flat bar that is welded to the teeth. The spoon ditch makes backfilling so much easier and taking curves are alot easier. We have every size spoon from 4" to 18". And if your laying Springfield tile with locking tabs either drill out tabs or cut off your spicket end of your outlet pipe and cut some of the ribs off to use as a pusher so you dont mess up your bells. Or if in trees and leave gasket on use the same type or pusher pipe. In the picture the pusher pipe is still in the bell.
Edited by blden 9/9/2024 20:56
(20240809_103023 (full).jpg)
Attachments ---------------- 20240809_103023 (full).jpg (178KB - 1 downloads)
| |
|