|
| 2003 international 9200 with meritor 10 speed transmission won’t shift into high range all of the sudden. Checked for voltage at the two solenoids at rear of transmission and there is no voltage at either connector in high or low. There are two electrical connections up at the gear shifter. The 4 pin connector has a ground and 12 volts at other 3 pins. The 2 pin connector does not have any voltage in either range. The 2 pin connector is yellow and blue wires. Never been around a meritor electric shift so looking for info on how it works. Wondering if it could be bad shift switch. Thank you for any info | |
|