Jeffersonville, OH | 770oliver - 9/3/2024 19:21
Went to move our 9670 agco today and it went about 15 feet and started throwing transmission codes. Codes are e31-40 and sometimes e40-42. Right away it said something about sensors but I haven't seen that warning light again since it first happened. Any ideas what to check?
If you do have low voltage, fix that first.
Also, check the 2 twist on connectors on the firewall, and make sure they are clean, all the pins appear to be the same height, and that the lock rings are on the connectors and are in good shape. When you get a code for every coil, usually it is related to those harness connectors.
Chris |