|
sw mn | I had a 2013 gleaner s67 and found it was cheaper to put in a camera system with a display rather than spend the money to go through the c 2100 monitor. You always had the cameras on as I wired it so they came on with the switch. Mounted the display up on right hand side as close to top as possible so not to obstruct vision but easy to look at and used wired cameras. I had a Fookoo system from Amazon with 3 cameras one for unloader auger, backup camera .and bin camera, Monitor screen splits into 4 sections so can view up to four cameras at once or can go to just one camera. view Get at least a 9 inch display for easier viewing. system cost around $200 for all but that was several years ago. Went out the cab bottom with the wires through the wire access compartment under window | |
|
Combine camera
