Posted 7/16/2024 20:59 (#10814286 - in reply to #10813953) Subject: RE: Shot in the dark. Weld on Sprocket question.
A&M - 7/16/2024 16:36
Having a hell of a time tracking down a set of sprockets to go on a hydraulic motor. I need an inch and a half bore with a 3/8 key with either a 8 or 9 tooth sprocket in 80 chain. Google isn’t my friend this time around.
I can get those numbers with an X series hub but with 12tooth minimum and that’s to much. Any ideas where to check? Scouring the county side all this past weekend